Commonwealth legislation

CASA EX04/12 - Exemption - display of markings and carriage of identification plates

RepealedCTH

This Act has been repealed and is no longer in force. It is retained for historical reference.

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

2/10 complexity

This temporary exemption lets Australian fixed-wing aircraft and helicopters under 5,700 kg that operate only within Australia relax certain marking and ID-plate rules between 1 Feb 2012 and 31 Jan 2015. It permits registration numbers on the underside of the left or both wings, accepts 150 mm letter height, and waives a CASA-issued ID plate where the manufacturer’s data plate is already fitted.

JSON API Aviation / CASA instruments

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in CASA EX04/12 - Exemption - display of markings and carriage of identification plates.

CASA EX04/12 - Exemption - display of markings and carriage of identification plates

Instrument number CASA EX04/12

I, JOHN FRANCIS McCORMICK, Director of Aviation Safety, on behalf of CASA, make this instrument under regulation 11.160 of the Civil Aviation Safety Regulations 1998 (CASR 1998).

[Signed John F. McCormick]

John F. McCormick
Director of Aviation Safety

23 January 2012

Exemption — display of markings and carriage of identification plates

1 Duration

This instrument:

(a) commences 1 February 2012; and

(b) stops having effect at the end of January 2015.

2 Application

This instrument applies to Australian fixed-wing aircraft and rotorcraft with maximum take-off weight of less than 5 700 kg operating wholly within Australian territory (the aircraft).

3 Exemption

The aircraft is exempt from compliance with the following requirements:

(a) subregulation 45.045 (1) of CASR 1998 to the extent mentioned in Schedule 1;

(b) subregulation 45.145 (1) of CASR 1998 subject to the condition mentioned in Schedule 2;

(c) subparagraph 45.065 (3) (b) (ii) and item 1 of paragraph 45.065 (3) (c) of CASR 1998 subject to the condition mentioned in Schedule 3.

Schedule 1 Extent of exemption

The exemption extends only to display markings on the under surface of the port wing or across the under surface of both wings.

Schedule 2 Condition

The aircraft must carry a manufacturer’s data plate as required by regulation 21.820 of CASR 1998.

Schedule 3 Condition

The minimum height must be 150 millimetres.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 CASA EX04/12 - Exemption - display of markings and carriage of identification plates