11Standards for design of terminal instrument flight procedure for civil aircraft at military aerodromes

11 Standards for design of terminal instrument flight procedure for civil aircraft at military aerodromes

(1) A relevant designer designing a terminal flight procedure mentioned in subsection 6(1) that is of a type covered by the designer’s procedure design certificate, must ensure the procedure is designed in accordance with:

(a) subject to section 15, any applicable standards set out or referred to in ICAO Doc. 8168 (PANS‑OPS); and

(b) any applicable standards set out in the Part 173 Manual of Standards, subject to section 15 and any provision in this Division that modifies a standard.

(2) If, apart from this subsection:

(a) the designer would be required to ensure that a terminal instrument flight procedure is designed in accordance with a standard set out or referred to in the ICAO Doc. 8168 (PANS‑OPS) and a standard of the Part 173 Manual of Standards mentioned in paragraph (1)(b); and

(b) it is not possible to comply with both standards;

the designer is only required to ensure that the procedure is designed in accordance with the Manual of Standards.