242AApplication for renewal of accreditation

242A Application for renewal of accreditation Reg. 242A(1) revoked by S.R. No. 61/2022 reg. 8(1). Reg. 242A(2) substituted by S.R. No. 61/2022 reg. 8(2). (2) For the purposes of section 14(3) of the Act, an application for renewal of the accreditation of a building product must be in the form of Form 19A. (3) The application for renewal of the accreditation may be made 12 months before, but must be made no later than 6 months before, the expiry date of the accreditation. (4) The application for renewal of the accreditation must be accompanied by— (a) the fee prescribed in regulation 244(1); and (b) if required by the Committee, any information or document referred to in regulation 242(3)(b). Reg. 242AB inserted by S.R. No. 61/2022 reg. 9. 242AB Application for variation of accreditation For the purposes of section 14(5) of the Act, an application for variation of an accreditation of a building product must be in the form of Form 19A and may be made in respect of one or more of the following matters— (a) a transfer of the accreditation from the holder of the accreditation to another person; (b) a change of the name of the holder of the accreditation; (c) a change of the postal address, telephone number or email of the holder of the accreditation; (d) a change of the building product name; (e) a change of the name of one or more components that form part of the accredited building product; (f) a change to an installation manual for the building product, or to any performance requirement or standard applying to the accredited building product; (g) a change to the building product to reflect any amendment to a requirement in these Regulations in relation to which the building product is accredited; (h) a change to any condition imposed by the Committee; (i) the correction of an error in the certificate of accreditation for the building product; (j) a change in any other matter relating to the accreditation of the building product, which the Committee considers will not result in a significant departure from the performance of the building product or the purposes for which the building product was originally accredited. Reg. 242B (Heading) substituted by S.R. No. 61/2022 reg. 10(1). Reg. 242B inserted by S.R. No. 128/2021 reg. 12.