ACTIn ForceRegulation
Building (General) Regulation 2008
18ABuilding approval applications—asbestos warning
Start here
Get a plain-English read of 18A
Turn the raw legal text into a practical explanation grounded in Building (General) Regulation 2008.
18A Building approval applications—asbestos warning
notices—Act, s 152 (3) (b)
(1) This section applies to an application—
(a) for building approval under the Act, section 26 (Building
approval applications); and
(b) for approval of amended plans under the Act, section 31
(Application for approval of amended plans).
(2) Before issuing an approval under the Act, section 28 (Issue of
building approvals) or section 32 (Amendment of approved plans),
the certifier must decide whether loose-fill asbestos insulation was
installed in—
(a) a building—
(i) on which the building work the subject of the application
for building approval is to be done; or
(ii) to which the plans the subject of the application for
approval of amended plans relates; or
(b) a connected building.
(3) For subsection (2), the certifier must decide that loose-fill asbestos
insulation—
(a) was installed in the building or connected building if—
(i) the building or connected building is in a prescribed area;
and
(ii) either—
(A) the construction occupations registrar has issued a
statement that the registrar holds records indicating
that loose-fill asbestos insulation was installed in the
building or connected building; or
(B) the certifier has information indicating that loose-fill
asbestos insulation was installed in the building or
connected building; or
(b) was not installed in the building or connected building if—
(i) either—
(A) the building and connected building are not in a
prescribed area; or
(B) the building or connected building is in a prescribed
area, but the registrar has issued a statement that the
registrar does not hold any records indicating that
loose-fill asbestos insulation was installed in the
building or connected building; and
(ii) the certifier does not have any information indicating that
loose-fill asbestos insulation was installed in the building
or connected building.
(4) The certifier is taken to have information indicating that loose-fill
asbestos insulation was installed in a building or connected building
if—
(a) the building or connected building is included on the affected
residential premises register; and
(b) the affected residential premises register is publicly available.
(5) If the certifier decides that loose-fill asbestos insulation was installed
in the building or connected building, the certifier must before issuing
an approval mark each page of the approved plans with an asbestos
warning notice.
(6) If the certifier decides that loose-fill asbestos insulation was not
installed in the building or connected building, the certifier must not
mark the approved plans with an asbestos warning notice.
(7) The constructions occupations registrar may, in writing, declare an
area to be a prescribed area if satisfied that loose-fill asbestos
insulation was installed in a building in the area.
(8) A declaration is a notifiable instrument.
(9) In this section:
affected residential premises register—see the Dangerous
Substances Act 2004, section 47P.
connected building means a building attached to a building
mentioned in subsection (2) (a), in a way that loose-fill asbestos fibres
could transfer between the buildings.