16General requirements for plans—Act, s 27 (1) (a)

16 General requirements for plans—Act, s 27 (1) (a) (1) This section applies to plans accompanying an application for building approval. (2) The plans must— (a) be drawn in accordance with AS 1100, unless the plans were drawn before the standard commenced; and (b) show any area covered by the plans that is marked as an easement in the land titles register or on a deposited plan; and (c) if the building work will require the connection of, or alteration of the connection of, a pipe to the sewerage system—show any point of connection of the pipe to the sewerage system; and (d) if the building work will require the connection of, or alteration of the connection of, a pipe to a water main—show any point of connection of the pipe to the water main; and (e) if the building work will require the connection of, or alteration of the connection of, a pipe to a stormwater drain—show any point of connection of the pipe to the stormwater system; and (f) if the building work will, when finished, alter the surface stormwater drainage on the parcel of land where the work is to be done—show the proposed surface stormwater drainage on the parcel at the completion of the work; and (g) for the parcel of land where the work is to be done—include a site plan on a scale of not less than 1:200 showing— (i) the block and section number of the land (or for land under a land sublease, the sublease plan number); and (ii) the boundaries and dimensions of the land; and (h) if a performance requirement of the building code is to be complied with by use of a performance solution under the building code—identify the performance solution and include a statement that it is a performance solution under the building code. building work means building work to which the plans relate. performance requirement—see the building code.