Bega Valley Local Environmental Plan 2013
sch.2-sec-oc.5Signage
Start here
Get a plain-English read of sch.2-sec-oc.5
Turn the raw legal text into a practical explanation grounded in Bega Valley Local Environmental Plan 2013.
sch.2-sec-oc.5 Signage
Signage
(1) Must not cover mechanical ventilation inlet or outlet vents.
(2) Must not include flashing or moving components.
(3) Must not be erected or displayed on or above public roads and public reserves, unless otherwise permitted in this Schedule.
(4) Under awning signs
(a) Maximum area—1.5m2.
(b) Must be erected horizontally at least 2.6m from the ground or footpath.
(c) Must not project beyond awning.
(d) If erected above a public road, must not extend or project beyond a point 0.6m from the vertical projection of the kerb line.
(5) Fascia signs (attached to the fascia or return of an awning)
(a) Must not project above or below the fascia or return end of awning.
(b) Must not extend more than 300mm from the fascia or return end of awning.
(c) If erected above a public road, must not extend or project beyond a point 0.6m from the vertical projection of the kerb line.
(6) Top hamper signs (attached to the transom of a doorway or display window of a building)
(a) Must not extend more than 200mm beyond any building alignment.
(b) Must not extend below head of doorway or window to which it is attached.
(7) Flush wall signs (attached to the wall of a building (other than the transom of a doorway or display window) and not projecting more than 300mm from the wall)
(a) Must not exceed 2.5m2 for the combined area of all flush wall signs on the premises.
(b) If projecting over a public road, must be erected horizontally at least 2.6m from the ground or footpath.
(8) Window signs (attached to, or displayed on, a shop window)
(a) Maximum 1 per shopfront.
(b) Must be located on ground level.
(c) At least 50% of front window must remain uncovered.