The Auditing and Assurance Standards Board (AUASB) made Auditing Standard ASA 530 Audit Sampling pursuant to section 227B of the Australian Securities and Investments Commission Act 2001 and section 336 of the Corporations Act 2001, on 27 October 2009.
This compiled version of ASA 530 incorporates subsequent amendments contained in another Auditing Standard made by the AUASB up to and including 3 March 2020 (see Compilation Details).
Auditing Standard ASA 530
Audit Sampling
Application
Aus 0.1 This Auditing Standard applies to:
(a) an audit of a financial report for a financial year, or an audit of a financial report for a half-year, in accordance with the Corporations Act 2001; and
(b) an audit of a financial report, or a complete set of financial statements, for any other purpose.
Aus 0.2 This Auditing Standard also applies, as appropriate, to an audit of other historical financial information.
Operative Date
Aus 0.3 This Auditing Standard is operative for financial reporting periods commencing on or after 1 January 2010. [Note: For operative dates of paragraphs changed or added by an Amending Standard, see Compilation Details.]
Introduction
Scope of this Auditing Standard
This Auditing Standard applies when the auditor has decided to use audit sampling in performing audit procedures. It deals with the auditor’s use of statistical and non-statistical sampling when designing and selecting the audit sample, performing tests of controls and tests of details, and evaluating the results from the sample.
This Auditing Standard complements ASA 500,[1] which deals with the auditor’s responsibility to design and perform audit procedures to obtain sufficient appropriate audit evidence to be able to draw reasonable conclusions on which to base the auditor’s opinion. ASA 500 provides guidance on the means available to the auditor for selecting items for testing, of which audit sampling is one means.
Effective Date
[Deleted by the AUASB. Refer Aus 0.3]
Objective
The objective of the auditor, when using audit sampling, is to provide a reasonable basis for the auditor to draw conclusions about the population from which the sample is selected.
Definitions
For the purposes of the Australian Auditing Standards, the following terms have the meanings attributed below:
Audit sampling (sampling) means the application of audit procedures to less than 100% of items within a population of audit relevance such that all sampling units have a chance of selection in order to provide the auditor with a reasonable basis on which to draw conclusions about the entire population.
Section Application and Other Explanatory Materi - ASA 530 - Audit Sampling - October 2009 - Application and Other Explanatory Material | Zoe
Population means the entire set of data from which a sample is selected and about which the auditor wishes to draw conclusions.
Sampling risk means the risk that the auditor’s conclusion based on a sample may be different from the conclusion if the entire population were subjected to the same audit procedure. Sampling risk can lead to two types of erroneous conclusions:
In the case of a test of controls, that controls are more effective than they actually are, or in the case of a test of details, that a material misstatement does not exist when in fact it does. The auditor is primarily concerned with this type of erroneous conclusion because it affects audit effectiveness and is more likely to lead to an inappropriate audit opinion.
In the case of a test of controls, that controls are less effective than they actually are, or in the case of a test of details, that a material misstatement exists when in fact it does not. This type of erroneous conclusion affects audit efficiency as it would usually lead to additional work to establish that initial conclusions were incorrect.
Non-sampling risk means the risk that the auditor reaches an erroneous conclusion for any reason not related to sampling risk. (Ref: Para. A1)
Anomaly means a misstatement or deviation that is demonstrably not representative of misstatements or deviations in a population.
Sampling unit means the individual items constituting a population. (Ref: Para. A2)
Statistical sampling means an approach to sampling that has the following characteristics:
Random selection of the sample items; and
The use of probability theory to evaluate sample results, including measurement of sampling risk.
A sampling approach that does not have characteristics (i) and (ii) is considered non-statistical sampling.
Stratification means the process of dividing a population into sub-populations, each of which is a group of sampling units which have similar characteristics (often monetary value).
Tolerable misstatement means a monetary amount set by the auditor in respect of which the auditor seeks to obtain an appropriate level of assurance that the monetary amount set by the auditor is not exceeded by the actual misstatement in the population. (Ref: Para. A3)
Tolerable rate of deviation means a rate of deviation from prescribed internal control procedures set by the auditor in respect of which the auditor seeks to obtain an appropriate level of assurance that the rate of deviation set by the auditor is not exceeded by the actual rate of deviation in the population.
Requirements
Sample Design, Size and Selection of Items for Testing
When designing an audit sample, the auditor shall consider the purpose of the audit procedure and the characteristics of the population from which the sample will be drawn. (Ref: Para. A4-A9)
The auditor shall determine a sample size sufficient to reduce sampling risk to an acceptably low level. (Ref: Para. A10-A11)
The auditor shall select items for the sample in such a way that each sampling unit in the population has a chance of selection. (Ref: Para. A12-A13)
Performing Audit Procedures
The auditor shall perform audit procedures, appropriate to the purpose, on each item selected.
If the audit procedure is not applicable to the selected item, the auditor shall perform the procedure on a replacement item. (Ref: Para. A14)
If the auditor is unable to apply the designed audit procedures, or suitable alternative procedures, to a selected item, the auditor shall treat that item as a deviation from the prescribed control, in the case of tests of controls, or a misstatement, in the case of tests of details. (Ref: Para. A15-A16)
Nature and Cause of Deviations and Misstatements
The auditor shall investigate the nature and cause of any deviations or misstatements identified, and evaluate their possible effect on the purpose of the audit procedure and on other areas of the audit. (Ref: Para. A17)
In the extremely rare circumstances when the auditor considers a misstatement or deviation discovered in a sample to be an anomaly, the auditor shall obtain a high degree of certainty that such misstatement or deviation is not representative of the population. The auditor shall obtain this degree of certainty by performing additional audit procedures to obtain sufficient appropriate audit evidence that the misstatement or deviation does not affect the remainder of the population.
Projecting Misstatements
For tests of details, the auditor shall project misstatements found in the sample to the population. (Ref: Para. A18-A20)
Evaluating Results of Audit Sampling
The auditor shall evaluate:
The results of the sample; and (Ref: Para. A21-A22)
Whether the use of audit sampling has provided a reasonable basis for conclusions about the population that has been tested. (Ref: Para. A23)
* * *
Application and Other Explanatory Material
Definitions
Non-Sampling Risk (Ref: Para. 5(d))
Examples of non-sampling risk include use of inappropriate audit procedures, or misinterpretation of audit evidence and failure to recognise a misstatement or deviation.
Sampling Unit (Ref: Para. 5(f))
The sampling units might be physical items (for example, cheques listed on deposit slips, credit entries on bank statements, sales invoices or debtors’ balances) or monetary units.
Tolerable Misstatement (Ref: Para. 5(i))
When designing a sample, the auditor determines tolerable misstatement in order to address the risk that the aggregate of individually immaterial misstatements may cause the financial report to be materially misstated and provide a margin for possible undetected misstatements. Tolerable misstatement is the application of performance materiality, as defined in ASA 320,[2] to a particular sampling procedure. Tolerable misstatement may be the same amount or an amount lower than performance materiality.
Sample Design, Size and Selection of Items for Testing
Sample Design (Ref: Para. 6)
Audit sampling enables the auditor to obtain and evaluate audit evidence about some characteristic of the items selected in order to form or assist in forming a conclusion concerning the population from which the sample is drawn. Audit sampling can be applied using either non-statistical or statistical sampling approaches.
When designing an audit sample, the auditor’s consideration includes the specific purpose to be achieved and the combination of audit procedures that is likely to best achieve that purpose. Consideration of the nature of the audit evidence sought and possible deviation or misstatement conditions or other characteristics relating to that audit evidence will assist the auditor in defining what constitutes a deviation or misstatement and what population to use for sampling. In fulfilling the requirement of paragraph 10 of ASA 500, when performing audit sampling, the auditor performs audit procedures to obtain evidence that the population from which the audit sample is drawn is complete.
The auditor’s consideration of the purpose of the audit procedure, as required by paragraph 6, includes a clear understanding of what constitutes a deviation or misstatement so that all, and only, those conditions that are relevant to the purpose of the audit procedure are included in the evaluation of deviations or projection of misstatements. For example, in a test of details relating to the existence of accounts receivable, such as confirmation, payments made by the customer before the confirmation date but received shortly after that date by the client, are not considered a misstatement. Also, a misposting between customer accounts does not affect the total accounts receivable balance. Therefore, it may not be appropriate to consider this a misstatement in evaluating the sample results of this particular audit procedure, even though it may have an important effect on other areas of the audit, such as the assessment of the risk of fraud or the adequacy of the allowance for doubtful accounts.
In considering the characteristics of a population, for tests of controls, the auditor makes an assessment of the expected rate of deviation based on the auditor’s understanding of the controls or on the examination of a small number of items from the population. This assessment is made in order to design an audit sample and to determine sample size. For example, if the expected rate of deviation is unacceptably high, the auditor will ordinarily decide not to perform tests of controls. Similarly, for tests of details, the auditor makes an assessment of the expected misstatement in the population. If the expected misstatement is high, 100% examination or use of a large sample size may be appropriate when performing tests of details.
In considering the characteristics of the population from which the sample will be drawn, the auditor may determine that stratification or value-weighted selection is appropriate. Appendix 1 provides further discussion on stratification and value-weighted selection.
The decision whether to use a statistical or non-statistical sampling approach is a matter for the auditor’s judgement, however, sample size is not a valid criterion to distinguish between statistical and non-statistical approaches.
Sample Size (Ref: Para. 7)
The level of sampling risk that the auditor is willing to accept affects the sample size required. The lower the risk the auditor is willing to accept, the greater the sample size will need to be.
The sample size can be determined by the application of a statistically-based formula or through the exercise of professional judgement. Appendices 2 and 3 indicate the influences that various factors typically have on the determination of sample size. When circumstances are similar, the effect on sample size of factors such as those identified in Appendices 2 and 3 will be similar regardless of whether a statistical or non-statistical approach is chosen.
Selection of Items for Testing (Ref: Para. 8)
With statistical sampling, sample items are selected in a way that each sampling unit has a known probability of being selected. With non-statistical sampling, judgement is used to select sample items. Because the purpose of sampling is to provide a reasonable basis for the auditor to draw conclusions about the population from which the sample is selected, it is important that the auditor selects a representative sample, so that bias is avoided, by choosing sample items which have characteristics typical of the population.
The principal methods of selecting samples are the use of random selection, systematic selection and haphazard selection. Each of these methods is discussed in Appendix 4.
Performing Audit Procedures (Ref: Para. 10-11)
An example of when it is necessary to perform the procedure on a replacement item is when a voided cheque is selected while testing for evidence of payment authorisation. If the auditor is satisfied that the cheque has been properly voided such that it does not constitute a deviation, an appropriately chosen replacement is examined.
An example of when the auditor is unable to apply the designed audit procedures to a selected item is when documentation relating to that item has been lost.
An example of a suitable alternative procedure might be the examination of subsequent cash receipts together with evidence of their source and the items they are intended to settle when no reply has been received in response to a positive confirmation request.
Nature and Cause of Deviations and Misstatements (Ref: Para. 12)
In analysing the deviations and misstatements identified, the auditor may observe that many have a common feature, for example, type of transaction, location, product line or period of time. In such circumstances, the auditor may decide to identify all items in the population that possess the common feature, and extend audit procedures to those items. In addition, such deviations or misstatements may be intentional, and may indicate the possibility of fraud.
Projecting Misstatements (Ref: Para. 14)
The auditor is required to project misstatements for the population to obtain a broad view of the scale of misstatement but this projection may not be sufficient to determine an amount to be recorded.
When a misstatement has been established as an anomaly, it may be excluded when projecting misstatements to the population. However, the effect of any such misstatement, if uncorrected, still needs to be considered in addition to the projection of the
non-anomalous misstatements.
For tests of controls, no explicit projection of deviations is necessary since the sample deviation rate is also the projected deviation rate for the population as a whole. ASA 330[3] provides guidance when deviations from controls upon which the auditor intends to rely are detected.
Evaluating Results of Audit Sampling (Ref: Para. 15)
For tests of controls, an unexpectedly high sample deviation rate may lead to an increase in the assessed risk of material misstatement, unless further audit evidence substantiating the initial assessment is obtained. For tests of details, an unexpectedly high misstatement amount in a sample may cause the auditor to believe that a class of transactions or account balance is materially misstated, in the absence of further audit evidence that no material misstatement exists.
In the case of tests of details, the projected misstatement plus anomalous misstatement, if any, is the auditor’s best estimate of misstatement in the population. When the projected misstatement plus anomalous misstatement, if any, exceeds tolerable misstatement, the sample does not provide a reasonable basis for conclusions about the population that has been tested. The closer the projected misstatement plus anomalous misstatement is to tolerable misstatement, the more likely that actual misstatement in the population may exceed tolerable misstatement. Also, if the projected misstatement is greater than the auditor’s expectations of misstatement used to determine the sample size, the auditor may conclude that there is an unacceptable sampling risk that the actual misstatement in the population exceeds the tolerable misstatement. Considering the results of other audit procedures helps the auditor to assess the risk that actual misstatement in the population exceeds tolerable misstatement, and the risk may be reduced if additional audit evidence is obtained.
If the auditor concludes that audit sampling has not provided a reasonable basis for conclusions about the population that has been tested, the auditor may:
Request management to investigate misstatements that have been identified and the potential for further misstatements and to make any necessary adjustments; or
Tailor the nature, timing and extent of those further audit procedures to best achieve the required assurance. For example, in the case of tests of controls, the auditor might extend the sample size, test an alternative control or modify related substantive procedures.