1Airworthiness Directives 2004 - Revocation and Remaking - Transavia PL 12 Series Aeroplanes

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a) revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b) make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

Image unavailable in extracted text

David Villiers

Delegate of the Civil Aviation Safety Authority

20 December 2004

Note: Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1 Revocation and Remaking of

Airworthiness Directives

Transavia PL 12 Series Aeroplanes

AD Name AD Number

Nose Landing Gear Upper and Lower Pivot Support Assemblies - Inspection AD/PL 12/1 Amdt 2

Aerodynamic Surfaces - Modification AD/PL 12/2

Longitudinal Trim Augmenter AD/PL 12/3 Amdt 1

Stub Wing Structure - Inspection AD/PL 12/4

Rudder Pedal Assemblies - Inspection AD/PL 12/5

Nose Wheel Pivot Leg AD/PL 12/6 Amdt 3

Fuel Tank - Modification AD/PL 12/7

Stub Wing Spar AD/PL 12/8 Amdt 3

Superseded by AD/PL-12/15 AD/PL 12/9

Engine Mount Tube - Inspection AD/PL 12/10

Nose Wheel Pivot Pin - Inspection and Replacement AD/PL 12/11 Amdt 1

Cockpit Overturn Structure AD/PL 12/12 Amdt 3

Nose Wheel Pivot Assembly - Inspection AD/PL 12/13

Nose Landing Gear Pivot Pin and Bushes AD/PL 12/14 Amdt 1

Landing Gear Lower Pivot Lug AD/PL 12/15 Amdt 1

Engine Mount Tube AD/PL 12/16 Amdt 1

Pilot Compartment/Restraint - Modification AD/PL 12/17

Landing Gear Oleo Assemblies AD/PL 12/18 Amdt 1

Stub Wing Internal Structure - Inspection and Re-Protection AD/PL 12/19

Main Wing and Stub Wing Fatigue Life Limitation AD/PL 12/20 Amdt 3