Airworthiness Directives 2004 - Revocation and Remaking - Piper PA-24 (Comanche) Series Aeroplanes
Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
View image in the official source
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Piper PA-24 (Comanche) Series Aeroplanes
AD Name AD Number
Battery Cables - Provision of Insulation Inside Battery Box AD/PA-24/1
CANCELLED AD/PA-24/2
Nose Wheel Steering Arm Mounting Bracket - Reinforcement AD/PA-24/3
CANCELLED AD/PA-24/4
CANCELLED AD/PA-24/5
CANCELLED AD/PA-24/6
Control Wheel Sprocket Mounting Hole - Inspection AD/PA-24/7
Superseded by AD/PA-24/40 - CANCELLED AD/PA-24/8
Control Tube Guide Blocks - Safety Wiring AD/PA-24/9
CANCELLED AD/PA-24/10
CANCELLED AD/PA-24/11
Rubatex Blocks - Removal from Interior of Wing AD/PA-24/12
CANCELLED AD/PA-24/13
Exhaust System - Inspection AD/PA-24/14 Amdt 1
CANCELLED AD/PA-24/15
CANCELLED AD/PA-24/16 Amdt 1
CANCELLED AD/PA-24/17
Automatic Pilot - Pitch Servomotor - Modification AD/PA-24/18
CANCELLED AD/PA-24/19
CANCELLED AD/PA-24/20
CANCELLED AD/PA-24/21 Amdt 2
Baggage Door Latch - Inspection AD/PA-24/22
CANCELLED AD/PA-24/23
Propeller Inspection and Operating Instructions AD/PA-24/24
Seat Frame - Modification AD/PA-24/25
Pitch Trim Switch - Modification AD/PA-24/26 Amdt 1
Front Seat Restraint Installations - Modification AD/PA-24/27
Normal Operating and Never Exceed Speed Limitations - Reduction AD/PA-24/28 Amdt 1
Rudder Balance Weight - Installation AD/PA-24/29
Uncoordinated Manoeuvres - Warning Placard AD/PA-24/30 Amdt 1
Landing Gear and Flap Assemblies - Inspection AD/PA-24/31
Stabilator Attachment Bolts - Inspection AD/PA-24/32 Amdt 1
Stabilator Torque Tube Bearing Block Attachment Fitting AD/PA-24/33 Amdt 3
Automatic Pilot Roll Servo Shear Pin - Installation AD/PA-24/34
Beryl Aviation Filtrator Assembly - Replacement AD/PA-24/35
Fin Forward Spar Attachment - Inspection AD/PA-24/36
Stabilator Balance Weight Tube - Replacement AD/PA-24/37
Aileron Spar - Inspection and Modification AD/PA-24/38
Fuel Selector Valve - Inspection AD/PA-24/39
Aileron Nose Rib - Inspection and Modification AD/PA-24/40
Wing Inspection for Fatigue Cracking AD/PA-24/41 Amdt 2
Flap Extension Limitation - Warning Placard AD/PA-24/42
Wing Main Spar Lower Cap - Inspection AD/PA-24/43
Main Landing Gear Side Brace Stud AD/PA-24/44 Amdt 1
Engine Air Filter AD/PA-24/45