Z Zoe Where to start with an Australian legal problem: plain-English guides, with the legislation and case law behind them.
Section 1 - Airworthiness Directives 2004 - Revocation and Remaking - Boeing 727 Series Aeroplanes - Airworthiness Directives 2004 - Revocation and Remaking - Boeing 727 Series Aeroplanes | Zoe
Home / Legislation / Airworthiness Directives 2004 - Revocation and Remaking - Boeing 727 Series Aeroplanes / 1 CTH In Force Legislation
Airworthiness Directives 2004 - Revocation and Remaking - Boeing 727 Series Aeroplanes
1Airworthiness Directives 2004 - Revocation and Remaking - Boeing 727 Series Aeroplanes Start here
Get a plain-English read of 1 Turn the raw legal text into a practical explanation grounded in Airworthiness Directives 2004 - Revocation and Remaking - Boeing 727 Series Aeroplanes.
Explain section Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Boeing 727 Series Aeroplanes
AD Name AD Number
Flight Data Recorder & Flight Crew Voice Recorder - Install - CANCELLED AD/B727/1 Amdt 2
Landing Gear Warning System - Modification AD/B727/2
Inboard Flap Asymmetry Shut-Off Wiring - Modification AD/B727/3
Main Landing Gear Manual Extension Torque Tube - Modification AD/B727/4
Tailplane Rear Spar Lower Cap - Inspection AD/B727/5 Amdt 2
Engine Cone Bolt Nut - Inspection and Replacement AD/B727/6
Inboard and Outboard Midflap Carriage - Modification AD/B727/7 Amdt 1
Horizontal Stabilizer Trailing Edge Lower Beam and Elevator AD/B727/8
Main Landing Gear Safety Bar - Modification AD/B727/9 Amdt 1
Nose Landing Gear Drag Brace Arm - Inspection and Modification AD/B727/10
Wing Rib Doubler Replacement at Wing Buttock Line 3480 AD/B727/11
Addition of Access Doors to Horizontal Stabilizer AD/B727/12
CANCELLED AD/B727/13
Auxiliary Power Unit Cutout - Reinforcement AD/B727/14 Amdt 1
Nose Landing Gear Lock Actuator Crank - Inspection and Modification AD/B727/15
Control Column Shaker Motor - Circuit Revision AD/B727/16
Galley Forward Entry and Cargo Door Cutout - Modification AD/B727/17
Outboard Trailing Edge Foreflap Track Guide Block - Installation AD/B727/18
Nose Gear Drag Brace Support Beam and Support Fitting - Inspection and AD/B727/19 Amdt 3
Thrust Reverser Lockout Actuator Piston - Replacement AD/B727/20
Inboard Trailing Edge Upper Wing Panel - Replacement AD/B727/21
Main Landing Gear Actuator Beam - Inspection and Modification AD/B727/22
Inboard Mid-Flap Link Support Beam - Inspection and Modification AD/B727/23
Inboard Flap Drive Angle Gearbox Housing - Inspection and Modification AD/B727/24 Amdt 2
Engine Fuel Feed Line B-Nuts - Inspection and Replacement AD/B727/25
Lower Wing Inspar Rib - Inspection and Modification AD/B727/26
Main Landing Gear Actuator Beam - Inspection and Modification AD/B727/27
Emergency Brake System - Modification AD/B727/28
Flight Spoiler Actuator Support Fitting - Inspection and Replacement AD/B727/29
Nose Landing Gear Actuating Rod - Inspection and Replacement AD/B727/30
Stabilizer Upper Rear Spar Chord - Inspection and Modification AD/B727/31 Amdt 2
Nose Landing Gear Actuating Bracket - Inspection AD/B727/32
Nose Gear Steering Metering Valve and Cylinder - Inspection and Modification AD/B727/33 Amdt 1
Stabilizer Hinge Bearings and Bushings - Replacement AD/B727/34
Fuel Lines Within Fuselage - Modification AD/B727/35
Flap Track - Modification AD/B727/36
Main Landing Gear Actuator Link Assembly - Replacement AD/B727/38
Main Landing Gear Down Lock Universal Bolt - Replacement AD/B727/39
Cargo Door Mechanism Protective Cover - Installation AD/B727/40
Outboard Fuel Tank Access Door Bonding - Modification AD/B727/41
Door Mounted Escape Slide Component - Modification AD/B727/42
Automatic Pilot Servo Engage Switches - Modification AD/B727/43
Wing Centre Section Fasteners - Replacement AD/B727/44
Horizontal Stabilizer Rear Spar Centre Section Fitting - Inspection AD/B727/46 Amdt 1
Stabilizer Trim System Brake Assembly - Modification AD/B727/48
Main Landing Gear Door Actuator Fitting - Replacement AD/B727/49
Side Engine Gearbox Breather Duct - Modification AD/B727/50
Right Hand Inboard Midflap Trailing Edge Upper Chord Support Angle - AD/B727/51
Horizontal Stabilizer Trailing Edge Closure Rib Inboard Terminal Fitting - AD/B727/52
Main Landing Gear Side Strut - Modification AD/B727/53 Amdt 1
Landing Gear Forward Trunnion Support Special Stud - Replacement AD/B727/54
Main Landing Gear Uplock and Downlock - Inspection and Modification AD/B727/55 Amdt 1
Main Landing Gear Shock Strut Outer Cylinder - Inspection AD/B727/56
Thrust Reverser Deflector Doors - Modification AD/B727/57
Main Landing Gear Actuator Beam Support Link - Inspection and Modification AD/B727/58 Amdt 1
Main Landing Gear Down Lock Torque Tubes - Inspection and Modification AD/B727/59 Amdt 1
Fin Front Spar Forging - Inspection AD/B727/60
Rear Pressure Bulkhead Vertical Beams AD/B727/61 Amdt 2
Elevator Aft Control Quadrant - Modification AD/B727/62
Rudder Pedal Adjustment Crank Assembly - Modification AD/B727/63
Take-Off Warning Switch Setting Revision - Modification AD/B727/64 Amdt 1
Engine Fire Extinguisher - Inspection and Modification AD/B727/65
Engine Cone Bolt - Inspection and Replacement AD/B727/66
Nose Gear Drag Brace Lock Actuating Arm - Replacement AD/B727/67
Main Landing Gear Aft Trunnion - Inspection and Rework AD/B727/68
Main Landing Gear Down-Lock Torque Shaft P/N 65-23366 - Replacement AD/B727/70
Outboard Aileron Tab Mast Fitting - Inspection and Modification AD/B727/71
Toilet Areas - Inspection and Modification AD/B727/72
Nose Landing Gear Release Mechanism Torsion Shaft - Inspection AD/B727/73
Elevator Balance Panel Aft Hinge - Inspection AD/B727/74
Forward and Aft Cargo Door Stops - Inspection and Modification AD/B727/75 Amdt 2
Forward Lower Body Skin - Inspection AD/B727/76 Amdt 1
Hydraulic System B Pump Motor AD/B727/77 Amdt 1
Engine Fuel Feed Forward Shroud Hose Assemblies - Inspection and AD/B727/78 Amdt 1
Static Sensing Holes - Modification AD/B727/79
Horizontal Stabilizer Centre Section Front Spar Junction Fittings - Inspection AD/B727/80 Amdt 1
Body Station 910 Floor Beam - Inspection AD/B727/81
Horizontal Stabiliser Jackscrew Gimbal Support Fitting Assembly - Inspection AD/B727/82
Mid-Cabin Galley Door Evacuation Slide - Inspection AD/B727/83
Main Landing Gear Lock System AD/B727/84 Amdt 3
Main Landing Gear Side Strut AD/B727/85
Passenger Oxygen Mask Tube Attachment AD/B727/86
Auxiliary Body Fuel System AD/B727/87 Amdt 2
Main Cargo Door Cam Support Fittings AD/B727/88 Amdt 2
Cockpit Side Window - F-N Window Post AD/B727/89 Amdt 4
Ground Spoiler Hydraulic Tube Assemblies - Modification AD/B727/90
Leading Edge Slat Actuators - Inspection and Modification AD/B727/91
Take-Off Warning System - Modification AD/B727/92
Forward Entry Door Frame AD/B727/93 Amdt 3
Forward Cargo Compartment Sidewall Frame AD/B727/94 Amdt 1
Outer Wing Upper Stringers AD/B727/95 Amdt 2
Wing Rear Spar Terminal Fitting AD/B727/96 Amdt 1
Supplementary Structural Integrity AD/B727/97 Amdt 4
Main Cargo Door Skin - Inspection and Modification AD/B727/98
No. 3 Cargo Door Frame AD/B727/99 Amdt 3
Elevator Rear Spar AD/B727/100 Amdt 3
Rear Pressure Bulkhead Web AD/B727/101 Amdt 1
Bolt Attaching Slat to Slat Track AD/B727/102 Amdt 1
MLG Side Strut Downlock Bearing and Bolt AD/B727/103
Main Landing Gear Lock System AD/B727/104
Take-Off Warning AD/B727/105 Amdt 1
Main Landing Gear Support Link AD/B727/106
MLG Wheel Well Pressure Floor AD/B727/107 Amdt 2
Aileron Power Control Unit AD/B727/108
Fuselage - Aft Lower Lobe Frame AD/B727/109 Amdt 1
Wing Centre Section Front Spar Web AD/B727/110 Amdt 2
Engine Mount Cone Bolt Nuts AD/B727/111
Fuselage Forward Lower Body Skin AD/B727/112 Amdt 1
Aft Mount Support Fittings Engines 1 and 3 AD/B727/113
Main Landing Gear I/B Door Actuator Rib Fitting - CANCELLED AD/B727/114
Fuselage Lap Joints S-14, S-19, S-20, and S-26 - CANCELLED AD/B727/115
Fuselage Lap Joints AD/B727/116 Amdt 1
Inboard T/E Flaps Inboard Track AD/B727/117
Structural Modification Program AD/B727/118 Amdt 1
Escape Slide Release Cable AD/B727/119
Fuel Tank Access Doors AD/B727/120
Takeoff Configuration Warning System AD/B727/121
Forward and Aft Attendants Panel Ground Wire Installation AD/B727/122
Landing Gear Selector Valve Actuator Arm AD/B727/123
Fuselage Crown Skin Circumferential Joint BS 1080 AD/B727/124
Upper Body Skin Bonded Tear Straps AD/B727/125
Main Deck Cargo Door AD/B727/126
Aft Cargo Compartment Corrosion AD/B727/127 Amdt 1
Corrosion Prevention and Control Program AD/B727/128 Amdt 1
Fuselage Circumferential Joint Doubler BS259, 360, 441, 481 and 681 AD/B727/129
Life Raft Stowage Compartment AD/B727/130
Fuselage Skin Cracking AD/B727/131 Amdt 1
Number Two Cargo Doorway Frames AD/B727/132
Inboard TE Flap Inboard Track AD/B727/133
Auxiliary Fuel Tanks AD/B727/134
Main Deck Cargo Compartment AD/B727/135 Amdt 1
MLG Door Actuator Rib Fitting and Attach Bolts AD/B727/136 Amdt 2
Brake Wear Limit AD/B727/137 Amdt 1
Main Cargo Door AD/B727/138
Cargo Door Latch Lockpin AD/B727/139
Body Station 950 Side Fitting AD/B727/140
Body Station 870 Terminal Fitting AD/B727/141
Wing Slat Track Roller Bearing Bolts AD/B727/142 Amdt 1
Bendix Brakes Fitted with Nasco Rotors AD/B727/143
Wing Centre Section Front Spar Web AD/B727/144 Amdt 1
Lavatory Drain System AD/B727/145
Ageing Aircraft Structural Inspection Programme AD/B727/146
Fuselage Frames at BS 760.95, 783.95, 825.95 and 848.95 AD/B727/147 Amdt 1
Fuel Actuator Shutoff Valve AD/B727/148
Elevator Rear Spar - 2 AD/B727/149
Main Deck Cargo Door AD/B727/150
Engine Forward Support Fitting AD/B727/151
Rear Spar Web Between Right and Left BBL 40 AD/B727/152 Amdt 1
Main Landing Gear Manual Extension Gearbox AD/B727/153
Fuel Valve Actuator Replacement AD/B727/154
Fuselage Skin Lap Joints AD/B727/155
Main Cargo Deck Floor Beams AD/B727/156
Main Cargo Deck Floor Beams AD/B727/157
Main Cargo Deck Floor Beams AD/B727/158
Main Cargo Deck Floor Beams AD/B727/159
Lower Skin Panel at the Lower Row of Fasteners of Fuselage Lap Joints AD/B727/160 Amdt 2
Fuel Boost Pump Wiring Conduits AD/B727/161 Amdt 1
Vertical Beam Web and Forward Flange of the Aft Pressure Bulkhead AD/B727/162
Lower Fuselage Skin Panels AD/B727/163
NLG Wheel Well Pressure Web AD/B727/164
Upper and Lower Sills of Number 1 Cargo Door AD/B727/165
Argo-Tech/TRW Fuel Boost Pumps AD/B727/166
Forward Entry Doorway AD/B727/167
Wing Rib-to-Stringer Attachment AD/B727/168
Mid-Galley Door Hinge Cutout AD/B727/169
Fuselage Circumferential Skin Joints AD/B727/170
MLG Forward Trunnion Bearing Support Fitting AD/B727/172
Horizontal Stabiliser Hinge Pin AD/B727/173
Shoulder Restraint of Attendant or Observers Seat AD/B727/174
Wing Rear Spar Upper Chord AD/B727/175
Horizontal Stabiliser - Elevator Hinge Support Ribs AD/B727/176
Main Deck Cargo Door Hinge, Cargo Door System and Cargo Barrier - 1 AD/B727/177
Main Deck Cargo Door Hinge, Cargo Door System and Cargo Barrier - 2 AD/B727/178
Main Deck Cargo Door Hinge, Cargo Door System, and Cargo Barrier - 3 AD/B727/179
Main Deck Cargo Door Hinge, Cargo Door System, and Cargo Barrier - 4 AD/B727/180
Wire Bundle Chafing AD/B727/181
Wing Rear Spar Upper Chord AD/B727/182
Autopilot Pitch Control Computer AD/B727/184
Hydraulic Accumulator End Cap Separarion AD/B727/185
Forward Ceiling Access Panel/Door AD/B727/186
Forward and Aft Frames of Aft Cargo Door Opening AD/B727/187
Main Deck Cargo Door Forward and Aft Hinge Fitting Structure AD/B727/188
Engine Mount Forward Cone Bolt Flange Attachment AD/B727/189
Electrical Bonding AD/B727/190
Main Landing Gear Forward Trunnion Attach Fittings AD/B727/191
Engine - Reverse Thrust Operating Limitations AD/B727/192
Cargo Restraint Strap Assemblies AD/B727/193