Z Zoe Where to start with an Australian legal problem: plain-English guides, with the legislation and case law behind them.
Home / Legislation / Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron Canada (BHTC) 206 and Agusta Bell 206 Series Helicopters / 1 CTH In Force Legislation
Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron Canada (BHTC) 206 and Agusta Bell 206 Series Helicopters
1Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron Canada (BHTC) 206 and Agusta Bell 206 Series Helicopters Start here
Get a plain-English read of 1 Turn the raw legal text into a practical explanation grounded in Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron Canada (BHTC) 206 and Agusta Bell 206 Series Helicopters.
Explain section Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Bell Helicopter Textron Canada (BHTC) Agusta Bell 206 Series Helicopters
AD Name AD Number
Fuel Booster Pump Wiring - Modification AD/BELL 206/1
Exhaust Stack Clamps - Replacement AD/BELL 206/2
Forward Engine Mount Attachment - Inspection and Modification AD/BELL 206/3
Control Tubes - Inspection AD/BELL 206/4
Cyclic Pitch Control System Lever - Inspection and Modification AD/BELL 206/5
Retirement Life - Fatigue Critical Components AD/BELL 206/6 Amdt 35
Tail Boom - Inspection AD/BELL 206/7 Amdt 1
Transmission Spider - Inspection and Life Limitation AD/BELL 206/8 Amdt 2
Tail Rotor Control Tube - Inspection AD/BELL 206/9 Amdt 1
Removal Of Landing Gear Spacers - Modification AD/BELL 206/10
Main Rotor Blade Retention Bolt - Inspection AD/BELL 206/11
Transmission Magnetic Drain Plug B-734 Replacement AD/BELL 206/12
Fan Shaft Assembly - Inspection AD/BELL 206/13
Cyclic Control Bellcrank Supports - Inspection and Replacement AD/BELL 206/14 Amdt 2
Tail Rotor Pedal Controls Modification AD/BELL 206/15
Cyclic Stick Balance Spring Clip - Inspection AD/BELL 206/16
Transmission Mount Spindle - Inspection AD/BELL 206/17 Amdt 1
Console Access Panel Attachment Screws - Replacement AD/BELL 206/18
Tail Rotor Pedal Controls - Inspection AD/BELL 206/19 Amdt 1
Cyclic Control Installation - Fitment of Balance Spring AD/BELL 206/20 Amdt 1
Cyclic Stick Lever Assembly P/N 206-00-339-1 - Inspection AD/BELL 206/21
Hydraulic Actuator - Replacement AD/BELL 206/22
Section 1 - Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron Canada (BHTC) 206 and Agusta Bell 206 Series Helicopters - Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron Canada (BHTC) 206 and Agusta Bell 206 Series Helicopters | Zoe Overhead Console Installation - Inspection AD/BELL 206/23
Engine Chip Detector Indicator - Installation AD/BELL 206/24
Tail Rotor Balance Check and Tail Rotor Gearbox Casing and Mounting AD/BELL 206/25
Engine Firewall Seal - Modification AD/BELL 206/26
Voltage Regulator - Replacement AD/BELL 206/27
Engine Bell Mouth Seal Doubler - Modification AD/BELL 206/28
Cover Assembly P/N 206-001-012-1 or P/N 206-001-012-7 - Inspection and AD/BELL 206/29
Main Transmission Magnetic Plug - Inspection AD/BELL 206/30
Main Transmission - Modification AD/BELL 206/31
Aluminium Fuel Lines - Replacement AD/BELL 206/32
CANCELLED AD/BELL 206/33 Amdt 2
Strap P/N 206-031-200-23 and -24 - Replacement AD/BELL 206/34 Amdt 1
Superseded by AD/BELL 206/6 Amdt7 - CANCELLED AD/BELL 206/35 Amdt 3
Emergency Flotation Solenoid Valve - Inspection AD/BELL 206/36 Amdt 1
Anti Torque Control Idler Assembly P/N 206-001-746-5 - Inspection and Rework AD/BELL 206/37
Main Rotor Mast - Inspection AD/BELL 206/38
Nut P/N 1022A14 Main Rotor Hub Latch Bolt and Blade Retention Bolt - AD/BELL 206/39
Tail Rotor Control Tube Tunnel - Modification AD/BELL 206/40
Vertical Fin - Inspection AD/BELL 206/41
Pylon Support Link P/N 206-031-508 - Inspection AD/BELL 206/42 Amdt 2
Heater Fuel Line P/N 206-070-705-1 - Inspection AD/BELL 206/43
Rotor Brake Disc Assembly P/N 4000071 - Inspection and Modification AD/BELL 206/44
Tail Rotor Drive Shaft Cover and Lower Skin of Horizontal Stabilizer - AD/BELL 206/45
Tailboom Skin Splice - Inspection AD/BELL 206/46 Amdt 1
Hydraulic Servo Actuator Piston P/N 41000005 - Inspection and Replacement AD/BELL 206/47 Amdt 1
Tail Rotor Blades - Inspection - CANCELLED AD/BELL 206/48 Amdt 1
Hydraulic Servo Actuator Servo Valve Drive Locknut - Inspection AD/BELL 206/49
Main Rotor Pitch Link Tubes - Inspection AD/BELL 206/50
Vertical Fin Support Forgings AD/BELL 206/51 Amdt 2
Heater Fuel Line P/N 206-070-231-1 - Inspection AD/BELL 206/52
Tail Rotor Gearbox Assembly - Inspection AD/BELL 206/54
Pylon Support Link P/N 206-031-508-5 and -7 - Replacement AD/BELL 206/55
Starter Generator Retaining Clamp T Bolt - Inspection AD/BELL 206/56 Amdt 1
Horizontal Stabilizer AD/BELL 206/57 Amdt 2
Full Cell Cavity and Vent Line Modification AD/BELL 206/58
Oil Pressure Tube Assemblies - Inspection and Replacement AD/BELL 206/59
Flight Control System Bolts - Inspection and Replacement AD/BELL 206/60 Amdt 1
Main Rotor Hub Yoke - Inspection and Rework AD/BELL 206/61
Main Rotor Grips - Inspection and Replacement - CANCELLED AD/BELL 206/62 Amdt 1
Horizontal Stabilizer - Modification AD/BELL 206/63
Superseded by AD/BELL 206/62 Amdt1 - CANCELLED AD/BELL 206/64
Main Rotor Pitch Link Clevises - Inspection AD/BELL 206/65 Amdt 2
Tail Rotor Control Tube - Inspection AD/BELL 206/66
Tail Rotor Drive - Inspection of Clamp Type Bearing Hangars AD/BELL 206/67
Main Rotor Pillow Block Bushings - Replacement AD/BELL 206/68
Passenger Door Attachments - Inspection AD/BELL 206/69
Hydraulic Servo Actuator Support Assembly - Inspection AD/BELL 206/70 Amdt 2
Main Rotor Split Cone Set - Inspection AD/BELL 206/71
CANCELLED AD/BELL 206/72 Amdt 6
Main Rotor Hub Pillow Block AD/BELL 206/73 Amdt 7
Tail Rotor Drive Shaft Bearings - Replacement AD/BELL 206/74
Horizontal Stabiliser - Inspection and Modification or Retirement AD/BELL 206/76 Amdt 2
Tail Rotor Drive Shaft - Replacement of Bearing Hangars AD/BELL 206/77
Freewheeling Outer Race Shaft - Inspection AD/BELL 206/78
Main Input Drive Shaft Assembly - Inspection and Installation of Visual Aid AD/BELL 206/79 Amdt 1
Fuel Feed Tube and Vent Tube - Replacement AD/BELL 206/80
Auxiliary Fin - Inspection AD/BELL 206/81
Centre Post Installation - Structural Attachment - Inspection and Modification AD/BELL 206/82
Main Rotor Trunnion - Inspection and Retirement - CANCELLED AD/BELL 206/83 Amdt 2
Main Rotor Trunnion - Inspection and Retirement - CANCELLED AD/BELL 206/84 Amdt 1
Fuel Filter and Hoses Installation - Modification AD/BELL 206/85 Amdt 1
Pylon Support Installation Retaining Bolts - Inspection AD/BELL 206/86
CANCELLED - AD/SUPP/2 Amdt1 refers - CANCELLED AD/BELL 206/87
Battery Relay Diode Assembly P/N 30-037-13 - Replacement AD/BELL 206/88
Emergency Flotation Kit Valve Assembly P/N 206-073-915-5 - Inspection AD/BELL 206/89
Tail Rotor Blade Tip Block AD/BELL 206/90 Amdt 6
Longeron P/N 206-031-314 - Inspection and Repair AD/BELL 206/91 Amdt 1
Tail Rotor Gearbox P/N 206-040-400 (All Dash Numbers) and P/N 206-040- AD/BELL 206/93
Auxiliary Fuel System - Modification AD/BELL 206/94
CANCELLED AD/BELL 206/95 Amdt 1
Fuel Supply Tube Assembly AD/BELL 206/96
Quick Disconnect Dual Controls AD/BELL 206/97 Amdt 2
Main Rotor Blade - Inspection AD/BELL 206/98
Cyclic Control Stick Assembly AD/BELL 206/99 Amdt 2
Main Rotor Blade Retaining Nuts P/N 206-011-119-1 AD/BELL 206/100
Tail Boom to Gearbox Attachment AD/BELL 206/101 Amdt 1
Tail Rotor Yoke and Pitch Links AD/BELL 206/102 Amdt 2
Tension/Torsion Strap Fitting AD/BELL 206/103
Oil Cooler Blower Impeller - CANCELLED AD/BELL 206/104 Amdt 1
Airframe Fuel Filter Assembly AD/BELL 206/105 Amdt 1
Float Inflation Valve AD/BELL 206/106
Main Rotor Mast AD/BELL 206/107
Stabilizer Identification AD/BELL 206/108
Tail Boom Skin AD/BELL 206/109 Amdt 3
Tail Rotor Pitch Links AD/BELL 206/110
Engine Fuel Valve Electrical Connectors P/N MS3456W14S-5S AD/BELL 206/111 Amdt 2
Tail Rotor Yoke AD/BELL 206/112 Amdt 1
Wedge (Bulged) Windows in Single Latch Doors AD/BELL 206/113
Fuel System Flow Switches AD/BELL 206/114
Horizontal Stabilizer P/N 206-023-119-151 AD/BELL 206/115
Bogus Tail Rotor Hub Assembly P/N 206-011-810-015 and Tail Rotor Yoke P/N AD/BELL 206/116 Amdt 1
Bogus Main Rotor Blades AD/BELL 206/117 Amdt 1
Bogus Tension Torsion Straps AD/BELL 206/118
Main Rotor Flight Control System Bolts AD/BELL 206/119 Amdt 1
Bogus Pressure Gauge Emergency Floats P/N 212-073-905-1 AD/BELL 206/120
Tail Rotor Blade Assembly AD/BELL 206/121
Tail Rotor Blade AD/BELL 206/122
Emergency Float Bags AD/BELL 206/123 Amdt 1
Driveshaft Seal AD/BELL 206/124 Amdt 1
Main Transmission Sungear AD/BELL 206/125 Amdt 2
Swashplate Support Assembly - CANCELLED AD/BELL 206/126 Amdt 2
Main Rotor Hub Trunnion Master Spline AD/BELL 206/127 Amdt 1
Main Rotor Blade and Trim Tab AD/BELL 206/128
Main Landing Gear Cross Tubes AD/BELL 206/129 Amdt 1
Main Landing Gear Cross Tubes (ronautical Accessories Inc.) AD/BELL 206/130 Amdt 1
Vertical Fin - External Doubler AD/BELL 206/131
Tail Rotor Driveshaft Bearing Support Brackets AD/BELL 206/132
Main Rotor Pillow Block Retention Bolts - CANCELLED AD/BELL 206/133
Fuel Valve Switch Guard AD/BELL 206/134
Main Rotor Trunnion and Mast AD/BELL 206/135
Hydraulic Servo Actuator Shoulder Bolt AD/BELL 206/136
Fuel Drain Tubes AD/BELL 206/137
Turbine Outlet Temperature Indicator AD/BELL 206/138
Main Rotor Blades Part Number 206-010-200-33 AD/BELL 206/139
Collective Idler Link and Collective Lever AD/BELL 206/140
Hydraulic Relief Valves AD/BELL 206/141
Tailboom Assembly AD/BELL 206/142
Tail Boom Skin AD/BELL 206/143 Amdt 3
Rotor Mast Collective Lever AD/BELL 206/144
Tail Rotor Blade Part Number 206-016-201 AD/BELL 206/145
Engine RPM Sensor - Limitations AD/BELL 206/146
Fuel System AD/BELL 206/147
Chip Detector Assembly AD/BELL 206/148 Amdt 1
Magnetic Brakes AD/BELL 206/149
Engine to Transmission Shaft AD/BELL 206/150
Memcor Truohm Magnetic Brake AD/BELL 206/151
Rescue Hoist AD/BELL 206/152
Tail Rotor Blade Trailing Edge Skin Cracks AD/BELL 206/153 Amdt 2
Freewheel Aft Bearing Cap AD/BELL 206/154