Commonwealth legislation

Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 205 Series Helicopters

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This instrument revokes the Airworthiness Directives listed for Bell Helicopter Textron 205‑series helicopters and remakes each as a separate instrument in the identical form. It is made by a delegate of the Civil Aviation Safety Authority under subregulation 39.001(1) of the Civil Aviation Safety Regulations 1998. Owners, operators and maintenance organisations of Bell 205 helicopters must continue to follow those ADs and will bear any compliance costs and administrative update obligations.

JSON API Aviation / CASA instruments

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 205 Series Helicopters.

Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 205 Series Helicopters

Airworthiness Directives 2004

I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

Authority, acting under subregulation 39.001 (1) of the Civil

Aviation Safety Regulations 1998:

(a) revoke the Airworthiness Directives mentioned in

Schedule 1; and

(b) make, as separate instruments, each Airworthiness

Directive mentioned in Schedule 1 and attached.

View image in the official source

David Villiers

Delegate of the Civil Aviation Safety Authority

20 December 2004

Note: Each attached Airworthiness Directive is being re-made in exactly the

same form as appears in the latest published edition of the Directive.

Schedule 1 Revocation and Remaking of

Airworthiness Directives

Bell Helicopter Textron 205 Series Helicopters

AD Name AD Number

Airworthiness Limitations AD/BELL 205/1 Amdt 32

Tail Rotor Yoke - Inspection AD/BELL 205/2

Main Rotor Blade - Modification AD/BELL 205/3

Superseded by AD/BELL 205/1W - CANCELLED AD/BELL 205/4

Superseded by AD/BELL 205/1W - CANCELLED AD/BELL 205/5

Cyclic Control Supports - Inspection AD/BELL 205/6

Tail Rotor Blade Grip - Inspection AD/BELL 205/7

Superseded by AD/BELL 205/46 - CANCELLED AD/BELL 205/8

Servo Cylinder Upper Control Tube Fittings AD/BELL 205/9

205A/A1 Tail Boom Vertical Fin Forward - Inspection and Modification AD/BELL 205/10

Superseded by DCA/BELL 205/1 Amdt4 - CANCELLED AD/BELL 205/11 Amdt 1

Superseded by AD/BELL 205/46 - CANCELLED AD/BELL 205/12 Amdt 2

Float Installation - Inspection and Modification AD/BELL 205/13 Amdt 1

Superseded by DCA/BELL 205/25 Amdt1 - CANCELLED AD/BELL 205/14

Tail Rotor Hub Assembly - Inspection AD/BELL 205/15

Fire Detection System - Audible Warning AD/BELL 205/16

Hydraulic Fluid Temperature Indicators - Installation AD/BELL 205/17

CANCELLED AD/BELL 205/18 Amdt 1

Transmission Support Case - Inspection AD/BELL 205/19 Amdt 1

CANCELLED AD/BELL 205/20 Amdt 2

Swashplate Scissors Lever Bolts - Inspection AD/BELL 205/21

Transmission Oil System - Inspection AD/BELL 205/22

Main Rotor Blades AD/BELL 205/23 Amdt 4

CANCELLED AD/BELL 205/24

CANCELLED AD/BELL 205/25 Amdt 3

Fire Extinguisher Cartridges - Inspection AD/BELL 205/26

CANCELLED AD/BELL 205/27

Main Rotor Blade - Removal From Service AD/BELL 205/28

Main Rotor Blade Bolt Washer - Inspection AD/BELL 205/29

Stabilizer Bar Outer Tube - Inspection - CANCELLED AD/BELL 205/30

Tail Boom Attachment Fitting and Longerons - Inspection AD/BELL 205/31 Amdt 1

Main Beam Cap - Inspection and Repair AD/BELL 205/32

Synchronised Elevator - Inspection, Modification and Retirement AD/BELL 205/33

Emergency Exits - Modification and Inspection AD/BELL 205/34 Amdt 2

Swashplate Support Assembly - Retirement Life AD/BELL 205/35 Amdt 1

Fuel Boost Pumps - Inspection AD/BELL 205/36

Main Rotor Hub Fitting Assemblies - Inspection AD/BELL 205/37

CANCELLED AD/BELL 205/38

CANCELLED AD/BELL 205/39

Tail Rotor Pitch Horns - Inspection AD/BELL 205/40

External Cargo Suspension Kit - Load Restriction and Modification AD/BELL 205/41 Amdt 1

Main Rotor Hub Inboard Fitting - Life Reduction AD/BELL 205/42

Engine Air Inlet Screen - Inspection AD/BELL 205/43

Cyclic Control Cylinder Assembly - Inspection of Piston Rods AD/BELL 205/44

Main Rotor Yoke AD/BELL 205/45 Amdt 4

Anti-Torque Control System - Modification to Pushrod Status AD/BELL 205/46

Hydraulic Servo Cylinder Assembly - Spanner Link Assembly Inspection and AD/BELL 205/47

Fuselage Main Beams Splice - Modification AD/BELL 205/48

Elevator to Horn Assembly Attachment - Modification AD/BELL 205/49

Main Rotor Grip/Blade Bolt - Inspection and Rework AD/BELL 205/50

Vertical Fin Spar Cap AD/BELL 205/51 Amdt 1

Tail Rotor Trunnion Bearing Housing AD/BELL 205/52

Main Rotor Pillow Block AD/BELL 205/53

Main Transmission Spiral Bevel Gear AD/BELL 205/54

Pitch Change Link Universal AD/BELL 205/55

Tail Rotor Hub P/N 204-011-801-121 AD/BELL 205/56

Bogus Tension Torsion Straps AD/BELL 205/57

Time Expired Tail Rotor Yoke AD/BELL 205/58

Swashplate Outer Ring AD/BELL 205/59

Tail Rotor Driveshaft Hangar Bearings AD/BELL 205/60

Main Transmission Lower Planetary Spider AD/BELL 205/61

42 Degree Tail Rotor Drive Gearbox AD/BELL 205/62

Tail Rotor Yoke AD/BELL 205/63

This AD yet to be issued AD/BELL 205/64

Vertical Fin Spar Cap AD/BELL 205/65

Main Rotor - Pillow Block Attachment Bolts AD/BELL 205/66

Main Hydraulic Servo Actuator Rod End Lock Washer AD/BELL 205/67

Tail Rotor Counterweight Bellcrank Retention Nut AD/BELL 205/68

Tail Rotor Grip AD/BELL 205/69

Tail Rotor Blade Fwd Tip Weight Retention Block and Aft Tip Closure AD/BELL 205/70

Main Rotor Tension-Torsion Strap AD/BELL 205/71

Main Rotor Grip AD/BELL 205/72

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 205 Series Helicopters