Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 204 Series Helicopters
1Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 204 Series Helicopters
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in Airworthiness Directives 2004 - Revocation and Remaking - Bell Helicopter Textron 204 Series Helicopters.
Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Bell Helicopter Textron 204 Series Helicopters
AD Name AD Number
Tail Rotor Hub - Modification - CANCELLED AD/BELL 204/1
Scissors Assembly - Modification - CANCELLED AD/BELL 204/2
Baggage Compartment Door - Modification - CANCELLED AD/BELL 204/3
Tail Rotor Assembly Inspection AD/BELL 204/4 Amdt 1
Tail Rotor Pitch Control Slider AD/BELL 204/5 Amdt 1
Fatigue Critical Components Retirement Lives AD/BELL 204/6 Amdt 12
Tail Rotor Yoke - Inspection AD/BELL 204/7
Main Rotor Blade - Modification AD/BELL 204/8
Superseded by DCA/BELL 204/6 Amdt3 AD/BELL 204/9
Tail Rotor Blade Grip AD/BELL 204/10 Amdt 1
Servo Cylinder Upper Control Tube Fittings - Inspections AD/BELL 204/11
Superseded by DCA/BELL 204/6 Amdt5 AD/BELL 204/12 Amdt 1
Tail Rotor Pitch Change Chain AD/BELL 204/13 Amdt 2
Main Rotor Blades - Inspection - CANCELLED AD/BELL 204/14
Fire Detection System - Audible Warning AD/BELL 204/15
Transmission Support Case - Inspection AD/BELL 204/16 Amdt 1
CANCELLED AD/BELL 204/17 Amdt 2
Swashplate Scissors Lever Bolts AD/BELL 204/18
Main Rotor Blade Cracking and Corrosion AD/BELL 204/19 Amdt 3
Emergency Exits - Modification and Inspection AD/BELL 204/20 Amdt 1
Main Rotor Blades - Inspection AD/BELL 204/21
Main Rotor Blades Removal From Service AD/BELL 204/22 Amdt 1
Main Rotor Blade Bolt Washer - Inspection - CANCELLED AD/BELL 204/23
Stabiliser Bar Outer Tube - Inspection - CANCELLED AD/BELL 204/24