Commonwealth legislation

AD/X-TS/7 - Co-Pilot Rudder Pedal Assembly

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

This Airworthiness Directive requires owners/operators of Eagle Aircraft X-TS, X-TS 150 and X-TS 150B with the listed manufacturer serial numbers to correct a defect in the co‑pilot rudder pedal assembly before further flight. The AD mandates either rework (including fitting a new bush and stopper), removal and modification under the manufacturer’s service bulletin, or replacement with a new assembly, and requires a placard where specified. Operators must organise and fund the work and follow the cited service bulletins.

JSON API Aviation / CASA instruments

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/X-TS/7 - Co-Pilot Rudder Pedal Assembly.

AIRWORTHINESS DIRECTIVE

View image in the official source

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official source

Eagle X-TS Series Aeroplanes

AD/X-TS/7 Co-Pilot Rudder Pedal Assembly

AD/X-TS/7 Co-Pilot Rudder Pedal Assembly 1/2005

Applicability: Eagle Aircraft Model X-TS Manufacturer’s Serial Number (MSN) 001-010; and Model X-TS 150 MSN 011-015; and

Model X-TS 150B MSN 016-042.

Requirement: Remove the co-pilot rudder pedal assembly P/N 2720D07-02 and accomplish the Eagle Aircraft Mandatory Service Bulletin (MSB) 1095 dated 16 September 2003. Install placard as per paragraph 8.2 of the MSB 1095.

Install new bush P/N 2720D08-39, stopper P/N 2720D08-44 and rework existing co- pilot rudder pedal assembly P/N 2720D07-02 as per provisions of Eagle Aircraft Service Bulletin (SB) 1096 dated 16 September 2003. [Only for Eagle aircraft model X-TS, ream the hole as per provisions of the SB 1113 if required, for the installation of the new bush].

Replace with new co-pilot rudder pedal assembly P/N 2720D07-10 as per provisions of the SB 1097 dated 16 September 2003.

Note: Department of Civil Aviation Malaysia Airworthiness Directives CAM AD 001-10-2004 dated 30 October 2004 (for model X-TS) and CAM AD 002-10-2004 dated 30 October 2004 (for models X-TS 150 & 150B) refer.

Compliance: Unless accomplished earlier, before further flight.

This Airworthiness Directive becomes effective on 18 November 2004.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

AIRWORTHINESS DIRECTIVE AIRWORTHINESS DIRECTIVE

AIRWORTHINESS DIRECTIVE

Eagle X-TS Series Aeroplanes

AD/X-TS/7 Co-Pilot Rudder Pedal Assembly AD/X-TS/7 Co-Pilot Rudder Pedal Assembly 1/2005

AD/X-TS/7 Co-Pilot Rudder Pedal Assembly 1/2005

Applicability: Eagle Aircraft Model X-TS Manufacturer’s Serial Number (MSN) 001-010; and Model X-TS 150 MSN 011-015; and

Model X-TS 150B MSN 016-042.

Replace with new co-pilot rudder pedal assembly P/N 2720D07-10 as per provisions of the SB 1097 dated 16 September 2003.

Compliance: Unless accomplished earlier, before further flight.

This Airworthiness Directive becomes effective on 18 November 2004.