Commonwealth legislation

AD/TB 200/8 Amdt 2 - Aileron and Elevator Control Gimbal Joint

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

AD/TB 200/8 Amdt 2 requires owners/operators of Aerospatiale (Socata) TB200 aeroplanes that have not incorporated MOD 10-0209-27 or Service Bulletin No. BS 10-140 to inspect the aileron and elevator control gimbal joints per Socata Service Bulletin TB No. 10-130 Revision 2 and apply paint witness marks (Applicability; Requirement). The Civil Aviation Safety Authority delegate sets mandatory inspection timing and repeat intervals; operators pay for inspections, markings and any corrective work to detect insecure shear/joint pins and reduce risk of joint disconnection (Compliance; Background).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/TB 200/8 Amdt 2 - Aileron and Elevator Control Gimbal Joint.

AD/TB 200/8 Amdt 2 - Aileron and Elevator Control Gimbal Joint

View image in the official source

AIRWORTHINESS DIRECTIVE

View image in the official source

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/TB 200/8 Amdt 1 and issues the following AD under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official source

Aerospatiale (Socata) TB 200 Series Aeroplanes

AD/TB 200/8

Amdt 2

Aileron and Elevator Control Gimbal Joint 4/2004

Applicability: All Model TB200 aircraft, without MOD 10-0209-27 or Service Bulletin No. BS 10- 140 incorporated.

Requirement: Inspect the aileron and elevator control gimbal joints in accordance with Socata Service Bulletin TB No. 10-130 Revision 2, dated January 2004.

Note: DGAC AD F-2003-368 R2 refers.

Compliance: 1. Within 300 flight hours or 12 months, whichever occurs first; following delivery of the aircraft or replacement of an aileron and elevator gimbal joint;

or,

Within 50 flight hours after 27 November 2003, whichever occurs later.

Repeat thereafter at intervals not to exceed 110 flight hours or 14 months, whichever occurs first.

The compliance times remain unchanged by this issue. This Amendment becomes effective on 15 April 2004.

Background: Failure of an aileron control gimbal joint shear pin could result in disconnection of the joint and consequent loss of control. This Directive requires inspection of the shear and joint pins for security and the application of paint witness marks to the pins.

Amendment 1 extended the inspection to the elevator control gimbal joints and changed compliance times.

Amendment 2 is issued in response to a revision of the related DGAC AD, which changes aircraft applicability to exclude aircraft that have the terminating modification for the requirements of this Directive incorporated.

Aerospatiale (Socata) TB 200 Series Aeroplanes

AD/TB 200/8 Amdt 2 (continued)

The original issue of this Airworthiness Directive became effective on 11 July 2002.

Signature of David Villiers Delegate of the Civil Aviation Safety Authority

David Villiers

Delegate of the Civil Aviation Safety Authority 5 March 2004

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 24 March 2004.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/TB 200/8 Amdt 2 - Aileron and Elevator Control Gimbal Joint

AIRWORTHINESS DIRECTIVE

Aerospatiale (Socata) TB 200 Series Aeroplanes

AD/TB 200/8

Amdt 2

Aileron and Elevator Control Gimbal Joint 4/2004

Applicability: All Model TB200 aircraft, without MOD 10-0209-27 or Service Bulletin No. BS 10- 140 incorporated.

Requirement: Inspect the aileron and elevator control gimbal joints in accordance with Socata Service Bulletin TB No. 10-130 Revision 2, dated January 2004.

Note: DGAC AD F-2003-368 R2 refers.

Compliance: 1. Within 300 flight hours or 12 months, whichever occurs first; following delivery of the aircraft or replacement of an aileron and elevator gimbal joint;

or,

Within 50 flight hours after 27 November 2003, whichever occurs later.

Repeat thereafter at intervals not to exceed 110 flight hours or 14 months, whichever occurs first.

The compliance times remain unchanged by this issue. This Amendment becomes effective on 15 April 2004.

Amendment 1 extended the inspection to the elevator control gimbal joints and changed compliance times.

Aerospatiale (Socata) TB 200 Series Aeroplanes

AD/TB 200/8 Amdt 2 (continued)