---

meta-content-style-type: text/css meta-content-type: application/xhtml+xml; charset=utf-8 meta-generator: Aspose.Words for .NET 22.10.0

?xml version="1.0" encoding="utf-8" standalone="no"?>

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

 

Image unavailable in extracted text Fairchild (Swearingen) SA226 and SA227 Series Aeroplanes

 

AD/SWSA226/32

Amdt 1

Applicability: Model

Rudder Pedal Links 2/93

 

SA226-T all serial numbers SA226-T(B) all serial numbers SA226-AT  all serial numbers

SA226-TC all serial numbers

 

SA227-TT TT421 through TT444 SA227-AT AT423 through AT440

SA227-AC AC406, AC415, AC416, and AC420 through AC448

 

Requirement: Remove and discard the rudder cable to rudder pedal link attachment bolts and bushings, and accomplish the following in accordance with the instructions in either Swearingen Aviation Corporation SB 27-027, or Fairchild SB 27-09, whichever is applicable, and the applicable maintenance manual:

 

(a)      Inspect the rudder pedal links, part number 26-72016, for elongated holes.

 

(b)     Replace any rudder pedal links that have elongated holes.

 

(c)      Install new rudder pedal link attachment bolts and bushings.

 

Note: FAA AD 92-19-08 Amdt 39-8366 refers.

 

Compliance: Upon the accumulation of 5,000 hours time in service or within the next 50 hours time in service after 4 February 1993, whichever occurs later, unless already accomplished within the last 5,000 hours time in service; thereafter at intervals not to exceed 5,000 hours time in service.

 

The compliance of the previous issue remains essentially unchanged. This Amendment is effective from 4 February 1993.

 

Background: Wear, which may not be readily discernible, can occur in the bolts which connect the rudder cables to the rudder pedal torque tube. Amendment 1 is issued in response to the FAA determination that certain SA227 series aircraft should be affected by the actions currently required by AD 81-02-01, which was the reason for the initial issue of this Directive.