Commonwealth legislation

AD/SF340/87 - Sealing Around Terminal Lugs on Fire Detectors

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Airworthiness Directive orders operators of Saab SF340A (S/N 004–159) and 340B (S/N 160–459) aeroplanes to reseal the tailpipe hot‑detection harness in accordance with Saab Mandatory Service Bulletin SAAB 340‑26‑030 (Requirement). CASA states the work targets false tail‑pipe overheat warnings caused by moisture, corrosion and chafed wiring (Background). Operators must complete the modification by 26 December 2003 (Compliance), bearing the direct cost and scheduling burden; two earlier Saab service bulletins are accepted as terminating action.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/SF340/87 - Sealing Around Terminal Lugs on Fire Detectors.

AD/SF340/87 - Sealing Around Terminal Lugs on Fire Detectors

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source

AIRWORTHINESS DIRECTIVE

View image in the official source

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official source

SAAB SF340 Series Aeroplanes

AD/SF340/87 Sealing Around Terminal Lugs on

Fire Detectors

13/2002

Applicability: Model SF340A aeroplanes, serial numbers (S/N) 004 through 159 inclusive and Model 340B aeroplanes, S/N 160 through 459 inclusive.

Requirement: Modify the Tailpipe Hot Detection harness in accordance with Saab Aircraft Mandatory Service Bulletin (SB) SAAB 340-26-030 dated 28 October 2002.

Prior modification in accordance with SB SAAB 340-26-018 dated 26 September 1997 and SB SAAB 340-26-029 dated 28 October 2002 is considered acceptable terminating action for this Directive.

Note: LFV AD 1-184 refers.

Compliance: Before 26 December 2003.

This Airworthiness Directive becomes effective on 26 December 2002.

Background: False warnings for the tail pipe hot detection system have been reported. This has led to delayed or aborted flights, and when airborne, engine in flight shut downs with a following diversion to the nearest airport. The false warnings are mainly caused by moisture ingress, corroded detectors, and chafed and broken wires for the tail pipe hot detection harness. This Directive requires the resealing of the tail pipe harness to improve moisture protection and strength of the harness.

Signature of James Coyne Delegate of the Civil Aviation Safety Authority

James Coyne

Delegate of the Civil Aviation Safety Authority 18 November 2002

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 4 December 2002.

Page 1 of 1

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/SF340/87 - Sealing Around Terminal Lugs on Fire Detectors

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

AIRWORTHINESS DIRECTIVE

SAAB SF340 Series Aeroplanes

AD/SF340/87 Sealing Around Terminal Lugs on

Fire Detectors

13/2002

Applicability: Model SF340A aeroplanes, serial numbers (S/N) 004 through 159 inclusive and Model 340B aeroplanes, S/N 160 through 459 inclusive.

Requirement: Modify the Tailpipe Hot Detection harness in accordance with Saab Aircraft Mandatory Service Bulletin (SB) SAAB 340-26-030 dated 28 October 2002.

Prior modification in accordance with SB SAAB 340-26-018 dated 26 September 1997 and SB SAAB 340-26-029 dated 28 October 2002 is considered acceptable terminating action for this Directive.

Note: LFV AD 1-184 refers.

Compliance: Before 26 December 2003.

This Airworthiness Directive becomes effective on 26 December 2002.

James Coyne

Delegate of the Civil Aviation Safety Authority 18 November 2002

The above AD is notified in the Commonwealth of Australia Gazette on 4 December 2002.

Page 1 of 1