AD/SEATS/10 - Sicma Aero Seat Leg Collars
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
View image in the official source
Seats and Berths
AD/SEATS/10 Sicma Aero Seat Leg Collars 10/97 DM
Applicability: Seats with Part Number and Serial Number listed in the table below, equipped with leg collars Part Number 95-000100-008-0:
| SEAT P/N | S/N | SEAT P/N | S/N | SEAT P/N | S/N |
|---|---|---|---|---|---|
| 5036211-01 | 7 & 8 | 91A1300-02 | 2 | 9612201-14 | 1 |
| 5036201-02 | 7 & 8 | 91A1310-03 | 7 & 8 | 9612210-31 | 1 |
| 5036211-03 | 4 | 91A1300-04 | 8 & 9 | 9612200-32 | 1 |
| 5036201-04 | 4 | 91A1310-05 | 3 | 5038211-01 | 69 to 81 |
| 5036241-05 | 10 to 12 | 91A1300-06 | 3 | 5038201-02 | 70 to 82 |
| 6573211-01 | 7 & 8 | 91A1310-07 | 2 | 5038241-03 | 79 to 85 |
| 6573201-02 | 7 & 8 | 91A1300-08 | 2 | 5038211-07 | 1 |
| 6573211-03 | 17 to 20 | 91A1310-09 | 2 | 5038201-08 | 1 |
| 6573201-04 | 17 to 20 | 91A1310-11 | 2 | 5044211-01 | 13 |
| 6573211-05 | 4 | 9611210-01 | 11 to 20 | 5044201-02 | 13 |
| 6573201-06 | 4 | 9611200-02 | 9 to 16 | 5044241-03 | 13 |
| 6573341-07 | 7 & 8 | 9611211-03 | 2 | 6573211-11 | 2 |
| 9184210-15 | 9 & 10 | 9611201-04 | 2 | 6573211-12 | 2 |
| 9184200-16 | 9 & 10 | 9611200-06 | 2 | 5673211-13 | 2 |
| 9184210-17 | 5 | 9611210-11 | 2 | 5673211-14 | 2 |
| 9184200-18 | 5 | 9611200-16 | 2 | 5673211-15 | 2 |
| 9184440-20 | 96 to 124 | 9612210-21 | 1 to 16 | 5673211-16 | 2 |
| 9184440-21 | 9 to 10 | 9612200-22 | 1 to 15 | ||
| 91A1310-01 | 2 | 9612211-13 | 1 |
Requirement: Replace the leg collars in accordance with Sicma Aero Seat SB 95-25-003.
Note: DGAC AD 97-134(AB) refers.
Compliance: Before 18 September 1997.
This airworthiness directive becomes effective on 6 August 1997 for Qantas and Ansett Australia, and 11 September for all other operators of this equipment.
Background: The seat manufacturer advised that a different anti corrosion treatment was used on the affected leg collars and that treatment may cause the collars not to meet the seat structural certification requirement. The manufacturer has advised that Ansett Australia is the only known operator in Australia.