Commonwealth legislation

AD/SD3-60/60 - Elevator Torque Shaft Assembly Bearing Housings

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

Requires owners/operators of all Shorts SD3‑60 aeroplanes to inspect the elevator torque shaft assembly bearing housings at frame station 74 in accordance with Shorts Mandatory Service Bulletin SD360‑27‑31. CASA issued the directive after a report of “free play” caused by incorrect installation; compliance is due before 4 December 2001 (unless already done) and then as part of the Aircraft Maintenance Programme. Operators bear the inspection and any corrective costs and must schedule the checks into ongoing maintenance.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/SD3-60/60 - Elevator Torque Shaft Assembly Bearing Housings.

AD/SD3-60/60 - Elevator Torque Shaft Assembly Bearing Housings

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source

AIRWORTHINESS DIRECTIVE

View image in the official source

View image in the official source
For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Shorts SD3-60 Series Aeroplanes

AD/SD3-60/60 Elevator Torque Shaft Assembly Bearing

Housings

10/2001

Applicability: All SD3-60 aircraft.

Requirement: Inspect in accordance with Shorts Mandatory Service Bulletin SD360-27-31.

Note: UK CAA AD 009-05-2001 refers.

Compliance: Before 4 December 2001, unless already accomplished; thereafter in accordance with Aircraft Maintenance Programme section 5-25-27.

This Airworthiness Directive becomes effective on 4 October 2001.

Background: An operator report was received of “free play” found in the elevator torque shaft assembly bearing housings at frame Stn. 74. Investigation determined that incorrect installation of the housings was the cause.

Signature of David Alan Villiers Delegate of the Civil Aviation Safety Authority

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 22 August 2001

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 12 September 2001.

Page 1 of 1

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/SD3-60/60 - Elevator Torque Shaft Assembly Bearing Housings

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Shorts SD3-60 Series Aeroplanes

AD/SD3-60/60 Elevator Torque Shaft Assembly Bearing

Housings

10/2001

Applicability: All SD3-60 aircraft.

Requirement: Inspect in accordance with Shorts Mandatory Service Bulletin SD360-27-31.

Note: UK CAA AD 009-05-2001 refers.

Compliance: Before 4 December 2001, unless already accomplished; thereafter in accordance with Aircraft Maintenance Programme section 5-25-27.

This Airworthiness Directive becomes effective on 4 October 2001.

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 22 August 2001

The above AD is notified in the Commonwealth of Australia Gazette on 12 September 2001.

Page 1 of 1