AD/SD3-60/38 Amdt 1 - Wing Strut Distance Piece and Adjacent Side Plates Corrosion
1AD/SD3-60/38 Amdt 1 - Wing Strut Distance Piece and Adjacent Side Plates Corrosion
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/SD3-60/38 Amdt 1 - Wing Strut Distance Piece and Adjacent Side Plates Corrosion.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Short SD3-60 Series Aeroplanes
AD/SD3-60/38
Amdt 1
Applicability: All Models.
Wing Strut Distance Piece and Adjacent Side Plates Corrosion
9/93
Requirement: Action in accordance with Shorts Mandatory SB SD360-53-38 Revision 1.
Note: Accomplishment of SB SD360-53-39 constitutes terminating action for the inspections required by SB SD360-53-38.
Compliance: a. Unless the inspection of both the distance piece and adjacent side plates has already been accomplished, within 30 days after 19 August 1993.
b. Reinspect reworked distance pieces and/or side plates at intervals not to exceed 600 hours time in service or 3 months, whichever occurs first.
Background: Corrosion had been detected on the horizontal leg of the distance piece during non routine maintenance.
Amendment 1 is issued to reflect a revision of the Requirement Document which introduces an inspection of the side plates in addition to the distance piece, and a repeat inspection of any reworked parts.