Division Eurocopter AS 332 (Super Puma) Series He - AD/S-PUMA/73 - OEI Training Flights/Main Gear Box Freewheel Shaft - Eurocopter AS 332 (Super Puma) Series Helicopters | Zoe
<table cellspacing="0" cellpadding="0" style="margin-top:0pt; margin-bottom:0pt; border-collapse:collapse"><tbody><tr style="height:520.5pt"><td style="width:74.35pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><p><span>Requirement:</span></p></td><td style="width:413.9pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><p style="margin-left:21.3pt; margin-bottom:12pt; text-indent:-21.3pt"><span>1.</span><span style="width:12.3pt; text-indent:0pt; display:inline-block"> </span><span>For aircraf</span><span>t with MGB main reduction gear modules equipped with freewheel shafts as listed in “Applicability” section above, and unless Requirements 2, 3 or 4 of this AD is accomplished as applicable:</span></p><p style="margin-top:12pt; margin-left:42.55pt; margin-bottom:12pt; text-indent:-21.25pt"><span>a)</span><span style="width:11.93pt; text-indent:0pt; display:inline-block"> </span><span>One-Engine-Inoperative (OEI) / Engine failure training is prohibited. </span><span></span><span>Insert a copy of this AD in the Limitations section of the Flight Manual.</span></p><p style="margin-top:12pt; margin-left:42.55pt; margin-bottom:12pt; text-indent:-21.25pt"><span>b)</span><span style="width:11.25pt; text-indent:0pt; display:inline-block"> </span><span>If an engine in-flight shut down occurs, comply with the instructions given in </span><span>Para</span><span> 2.B.2 of EUROCOPTER AS332 Alert Service Bulletin (ASB) No. 01.00.74 original issue or later NAA approved revisions.</span></p><p style="margin-top:12pt; margin-left:21.3pt; text-indent:-21.3pt"><span>2.</span><span style="width:12.3pt; text-indent:0pt; display:inline-block"> </span><span>Replace MGB main reduction gear modules equipped with freewheel shafts</span><br><span>P/N 332A32-2190-2</span><span>5 as listed below, in accordance with the instructions given in </span><span>Para</span><span> 2.B.2 of ASB No. 01.00.74 original issue or later NAA approved revisions.</span></p><table cellspacing="0" cellpadding="0" style="margin-top:0pt; margin-left:19.85pt; margin-bottom:0pt; border:0.75pt solid #000000; border-collapse:collapse"><tbody><tr style="height:14.2pt"><td style="border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>Freewheel shaft: S/N</span></p></td><td style="border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>installed on: main module P/N & S/N</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1231</span></p></td><td rowspan="2" style="border-top:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>332A32-3011-03M / M2079</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M937</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1115</span></p></td><td rowspan="2" style="border-top:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>332A32-3011-03M / M4001</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M635</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1159</span></p></td><td rowspan="2" style="border-top:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>332A32-3011-03M / M4004</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M907</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1124</span></p></td><td rowspan="2" style="border-top:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>332A32-3011-01M / M2044</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M486</span></p></td></tr></tbody></table><p style="margin-left:21.3pt; text-indent:-21.3pt"><span>3.</span><span style="width:12.3pt; text-indent:0pt; display:inline-block"> </span><span>Replace MGB main reduction gear modules equipped with freewheel shafts P/N 332A32-2190-25 as listed below, in accordance with the instructions given in paragraph 2.B.2 of </span><span>ASB No. 01.00.74 original issue or later NAA approved revisions.</span></p></td></tr></tbody></table>
<table cellspacing="0" cellpadding="0" style="margin-top:0pt; margin-bottom:0pt; border-collapse:collapse"><tbody><tr><td style="width:74.35pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><p><span></span></p></td><td style="width:413.9pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><table cellspacing="0" cellpadding="0" style="margin-top:0pt; margin-left:19.85pt; margin-bottom:0pt; border:0.75pt solid #000000; border-collapse:collapse"><tbody><tr><td style="border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>Freewheel shaft: S/N</span></p></td><td style="border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>installed on: main module P/N & S/N</span></p></td></tr><tr style="height:19.7pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1608</span></p></td><td rowspan="2" style="border-top:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>332A32-3011-03M / M2062</span></p></td></tr><tr style="height:16.45pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M945</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1078</span></p></td><td rowspan="2" style="border-top:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>332A32-3011-03M / M2088</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1087</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1272</span></p></td><td rowspan="2" style="border-top:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>332A32-3011-03M / M2104</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1273</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M1688</span></p></td><td rowspan="2" style="border-top:0.75pt solid #000000; border-left:0.75pt solid #000000; border-bottom:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>332A32-3011-03M / M2016</span></p></td></tr><tr style="height:14.2pt"><td style="border-top:0.75pt solid #000000; border-right:0.75pt solid #000000; padding-right:5.03pt; padding-left:5.03pt; vertical-align:middle"><p style="text-align:center"><span>M974</span></p></td></tr></tbody></table><p style="margin-left:21.3pt; margin-bottom:12pt; text-indent:-21.3pt"><span>4.</span><span style="width:12.3pt; text-indent:0pt; display:inline-block"> </span><span>Do not install MGB main reduction gear modules fitted with freewheel shafts as listed in the applicability section of this AD on a helicopter, without having ensured that the freewheel shafts of the main reduction gear module has been inspected by an approved repair station.</span></p><p class="Note" style="margin-top:12pt"><span>Note:</span><span> </span><span>EASA Emergency Airworthiness Directive No 2007-0312-E dated</span><br><span>21 December 2007 refers.</span></p></td></tr><tr><td style="width:74.35pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><p><span>Compliance:</span></p></td><td style="width:413.9pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><p style="margin-left:21.3pt; margin-bottom:12pt; text-indent:-21.3pt"><span>1.</span><span style="width:12.3pt; text-indent:0pt; display:inline-block"> </span><span>a) and b) Before further flight, after</span><span> the effective date of this AD.</span></p><p style="margin-top:12pt; margin-left:21.3pt; margin-bottom:12pt; text-indent:-21.3pt"><span>2.</span><span style="width:12.3pt; text-indent:0pt; display:inline-block"> </span><span>Within 40 Flight Hours (FH) after the effective date of this AD and at the latest by 31 May 2008.</span></p><p style="margin-top:12pt; margin-left:21.3pt; margin-bottom:12pt; text-indent:-21.3pt"><span>3.</span><span style="width:12.3pt; text-indent:0pt; display:inline-block"> </span><span>Within 200 Flight Hours (FH) after the effective date of this AD and at the latest by 30 June 2008.</span></p><p style="margin-top:12pt; margin-left:21.3pt; text-indent:-21.3pt"><span>4.</span><span style="width:12.3pt; text-indent:0pt; display:inline-block"> </span><span>After the effective date of this AD</span></p></td></tr><tr><td style="width:74.35pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><p><span></span></p></td><td style="width:413.9pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><p><span>This Airworthiness Directive becomes effective on 13 March 2008.</span></p></td></tr><tr><td style="width:74.35pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><p><span>Background:</span></p></td><td style="width:413.9pt; padding-right:5.35pt; padding-left:5.35pt; vertical-align:top"><p><span>This AD is issued following a hard landing which occurred recently while conducting in-flight OEI/engine failure training.</span><span> </span><span>During a RH single-engine approach with idle rating training mode activated on the LH engine, the flight crew encountered a sudden loss of drive on the RH side of the MGB.</span></p></td></tr></tbody></table>
MGB examinations revealed the failure of the RH freewheel due to excessive wear on some of its components. In case of freewheel malfunction on one of the two MGB inputs, the resulting overtorque at the remaining MGB input, given OEI mode activation, may not be transmitted by the second freewheel if the latter too is severely worn.The analysis of the various recordings made during overhauls and supplied by various repair stations identified a list of offending MGB main reduction gear modules and freewheel shafts that are currently in service.Consequently, this AD prohibits OEI/engine failure training with rotorcraft on which MGB main reduction gear modules equipped with freewheel shafts as listed in the “Applicability” section above and mandates their replacement.
Image unavailable in extracted text
Charles Lenarcic
Delegate of the Civil Aviation Safety Authority