AD/ROTAX/1 - Ignition Unit Rework
1AD/ROTAX/1 - Ignition Unit Rework
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/ROTAX/1 - Ignition Unit Rework.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Rotax Piston Engines
AD/ROTAX/1 Ignition Unit Rework 3/94 DM
Applicability: All Rotax 912 A series engines up to and including serial number 4,076.022. Requirement: If not previously accomplished in accordance with Bombardier Rotax Technical
Bulletin 912-02 dated 15 February 1993, then action in accordance with Bombardier
Rotax Technical Bulletin 912-02 Revision 1 dated 25 October 1993.
Note: BAZ (Austria) AD 75 dated 1 December 1993 refers.
Compliance: Prior to 28 February 1994.
Background: Bombardier Rotax has advised that cases of corrosion between the stator and ignition housing at the attachment screws have been reported. This corrosion causes insufficient ground connection which could result in ignition failures. Compliance date required by the BAZ is extended by approximately one month in this Directive.