AD/RES/16 - Safety Harness End Fittings - Davis Aircraft Products P/N FD 1497M - Removal From Service
1AD/RES/16 - Safety Harness End Fittings - Davis Aircraft Products P/N FD 1497M - Removal From Service
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/RES/16 - Safety Harness End Fittings - Davis Aircraft Products P/N FD 1497M - Removal From Service.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Restraint Equipment
AD/RES/16 Safety Harness End Fittings - Davis Aircraft Products P/N FD 1497M - Removal From Service
1/84
Applicability: All safety harnesses in agricultural aircraft fitted with Davis Aircraft Products anchor plate end fitting P/N FD 1497M.
Requirement: Remove from service safety harnesses fitted with Davis Aircraft products end fittings P/N FD 1497M and replace with an approved safety harness.
Note: The existing harness may be modified by replacing the applicable fittings with approved fittings.
Compliance: Within 100 hours time in service after 31 January 1984.
Background: As a result of an acident involving an agricultural aircraft in which the harness end fitting failed under low load conditions, tensile test of the applicable end fittings proved the inability of the fittings to meet the manufacturers tensile rating.