CTHIn ForceLegislation
AD/RAD/72 - Apollo SL30 VHF NAVCOM
Power OnPower On
Start here
Get a plain-English read of Power On
Turn the raw legal text into a practical explanation grounded in AD/RAD/72 - Apollo SL30 VHF NAVCOM.
Power On
Turn the SL30 on. Either turn the Power/Volume knob clockwise to turn the power on or, if installed, turn on the master switch that powers the radios. The SL30 will go through a short initialization routine and then briefly display the last VOR check date.
System Info (Refer to page 26 of operation manual)
System Info provides information about the Software versions and the Display Intensity.
Press SYS and turn the LARGE knob if necessary to the System Info page. Press ENT.
2. In the System Info function turn the LARGE knob to Nav Software Version.
3. Turn the SMALL knob to left (counterclockwise) to view DSP Software Version.
Note 1: The procedure specified in Requirement 1 is identical to the "PROCEDURE" section of UPS Aviation Technologies, Inc., Service Bulletin SB2001-003, dated 29 June 2001.