CTHIn ForceLegislation
AD/R22/53 - Main Rotor Blades
Robinson R22 Series HelicoptersRobinson R22 Series Helicopters
Start here
Get a plain-English read of Robinson R22 Series Helicopters
Turn the raw legal text into a practical explanation grounded in AD/R22/53 - Main Rotor Blades.
Robinson R22 Series Helicopters
| AD/R22/53 | Main Rotor Blades | 2/2006 |
|---|
| Applicability: | R22 helicopters fitted with P/N A016-2 Main Rotor Blades. |
|---|---|
| Requirement: | 1. Remove and replace P/N A016-2 Main Rotor Blades with P/N A016-4 Main Rotor Blades.2. P/N A016-2 blades are not to be returned to service under any circumstances.Accomplishment of this Airworthiness Directive is terminating action for the requirements of AD/R22/31 Amdt 11, which will be cancelled after 1 April 2006. |
| Compliance: | 1. Prior to 1 April 2006.2. After 1 April 2006. |
| This Airworthiness Directive becomes effective on 16 February 2006. | |
| Background: | There have been several accidents in Australia and overseas caused by failure of the Part Number A016-2 main rotor blade. The subsequent investigations showed that the design of the blade is not tolerant to certain environmental conditions that may allow moisture ingress and corrosion pits to develop in the inboard spar/root fitting attachment bolt hole. The corrosion pits can allow fatigue cracks to develop which may proceed to rapid failure of the main rotor blade within a few flights, with subsequent loss of the helicopter. This AD requires replacement of the P/N A016-2 main rotor blades with new improved design blades P/N A016-4. |
Image unavailable in extracted text
Neville Probert
Delegate of the Civil Aviation Safety Authority
20 December 2005