Commonwealth legislation

AD/R22/20 - Push Pull Tubes and Guides - Inspection and Modification

RepealedCTH

This Act has been repealed and is no longer in force. It is retained for historical reference.

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

2/10 complexity

Owners and operators of early Robinson R22 helicopters (S/N 0002–0369) must inspect the vertical push‑pull tubes and guide bushings for wear and replace parts that exceed limits, and install a protective sleeve and new guides per the manufacturer’s service bulletin.

The rule prevents excessive fretting near the main rotor gearbox that could lead to flight control failure, preserving safety.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/R22/20 - Push Pull Tubes and Guides - Inspection and Modification.

AD/R22/20 - Push Pull Tubes and Guides - Inspection and Modification

meta-content-style-type: text/css meta-content-type: application/xhtml+xml; charset=utf-8 meta-generator: Aspose.Words for .NET 22.10.0

?xml version="1.0" encoding="utf-8" standalone="no"?>

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source Robinson R22 Series Helicopters

AD/R22/20 Push Pull Tubes and Guides - Inspection

and Modification

Applicability: All R22 models with serial numbers 0002 through 0369.

2/84

Requirement: Part 1 With the aid of a small mirror and high intensity light, visually and carefully inspect the A121-7 vertical push pull tubes for wear in the area of the blue guide bushings. Also check for evidence of movement of the blue bushings in their mount causing fretting and deterioration of guides. Push pull tube wear between .005 and

.015 inch per side is acceptable.

If a tube is worn over .015 inch per side or the blue bushing is wearing through housing, replace tube, guide and bushings as applicable before further flight.

Part 2 Install protective sleeve and guides as per RHC SB No. 36.

Compliance: Part 1 Within 25 hours time in service after 28 December 1983.

Part 2 Within 100 hours time in service after 31 January 1984.

Background: The manufacturer advises that excessive wear of the vertical push pull tubes forward of the main rotor gearbox has been reported, consequently a protective sleeve and adjustable guide have been developed to nullify this problem.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.