AD/PC-12/22 - Electrical Power - Suppression Filters
1AD/PC-12/22 - Electrical Power - Suppression Filters
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/PC-12/22 - Electrical Power - Suppression Filters.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Pilatus PC-12 Series Aeroplanes
AD/PC-12/22 Electrical Power - Suppression Filters 13/99 TX
Applicability: All Model PC-12 and PC-12/45 with Manufacturers Serial Numbers MSN 101 up to and including MSN 289.
Requirement: 1. Remove suppression filter (A250) part number (P/N) 524.52.12.358 and install suppression filter (A250) P/N 524.52.12.502 in accordance with Pilatus PC-12 Service Bulletin (SB) No.24-014 dated 27 October 1999.
Note: The new suppression filter can be positively identified by the part number and a black placard with a yellow A250 marked on it.
- Perform system test in accordance with Pilatus PC-12 SB No.24-014 paragraph 3(D).
Note: FOCA Switzerland AD HB 99-542 refers.
Compliance: 1. Within the next 10 flights after the effective date of this directive.
- Prior to further flight after Requirement 1.
This Airworthiness Directive becomes effective on 8 November 1999.
Background: After installation of SB 24-012 and electrical power activation, circuit breaker CB 235, which protects the GEN 2 circuit, tripped. Investigation revealed the suppression diode in the suppression filter (A250) P/N 524.52.12.358 was shorted. The diode is not capable of carrying the operational loads in this installation and can melt, resulting in a short circuit. Overheat damage to electrical wiring can result.