AD/PA-28/93 - Flap Handle Attach Bolt
1AD/PA-28/93 - Flap Handle Attach Bolt
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/PA-28/93 - Flap Handle Attach Bolt.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Piper PA-28 Series Aeroplanes
AD/PA-28/93 Flap Handle Attach Bolt 9/96
Applicability: PA28-140 28-20000 through 28-26946 and 28-7125001 through
28-7725290
PA28-150, PA28-160, and PA28-180
28-1 through 28-5859, 28-7105001 through 28-
7505259, 28-E13, and 28-03
PA28-151 28-7415001 through 28-7715314
PA28-161 28-7716001 through 28-8616057, 2816001 through
2816102, and 2841001 through 2841346
PA28-181 28-7690001 through 28-8690062 and 2890001 through
2890169
PA28-235 28-10001 through 28-11378, 28-7110001 through 28-
7710089, and 28-E11
PA28-236 28-7911001 through 28-8611008 and 2811001 through
2811034
PA28-201T 28-7921001 through 28-7921095
PA28R-180 28R-30001 through 28R-31270 and 28R-7130001
through 28R-7130013
PA28R-200 28R-35001 through 28R-35820 and 28R-7135001
through 28R-7635462
PA28R-201 28R-7737001 through 28R-7837319 and 2837001
through 2837059
PA28R-201T 28R-7703001 through 28R-7803374 and 2803001
through 2803012
PA28RT-201 28R-7918001 through 28R-8218026
PA28RT-201T 28R-7931001 through 28R-8631005 and 2831001
through 2831038
Requirement: a) Measure the cable mounting attach hole diameter and enlarge the hole to .316 of an inch diameter. If the diameter of the cable mount attach hole is larger than .316 of an inch, replace the flap lever handle (refer to the illustrated parts catalogue for the part number), in accordance with the Instructions section of Piper SB 965.
b) Install a new bushing (using only Piper part number (P/N) 63900-174) into the cable mounting attach hole, in accordance with the Instructions section of Piper SB 965.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
c) Replace the flap lever handle attach bolt with a new clevis bolt (Piper P/N 400 673 or standard P/N AN23-11) in accordance with the Instructions section of Piper SB 965.
d) Inspect the washer, nut, and cotter pin, and if damaged, replace washer (Piper P/N 407-564 or standard P/N AN960-10), nut (Piper P/N 404-392 or standard P/N AN320-3), and cotter pin (Piper P/N 424-051 or standard P/N MS24665-132) in accordance with the Instructions section of Piper SB 965.