Commonwealth legislation

AD/PA-28/86 Amdt 1 - Ammeter Installation

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This airworthiness directive requires installing and properly supporting an ammeter shunt on specified Piper PA‑28 series aircraft per Piper Service Bulletin No. 811A, so the 20‑gauge ammeter wires do not carry mechanical loads. It applies to listed serial‑numbered PA‑28 variants (except those with 90‑amp alternators) and must be done within 100 hours time‑in‑service after 31 July 1986 to address loose/shorting ammeter connections and reduce the risk of electrical failure or cockpit fire.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/PA-28/86 Amdt 1 - Ammeter Installation.

AD/PA-28/86 Amdt 1 - Ammeter Installation

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Piper PA-28 Series Aeroplanes

AD/PA-28/86

Amdt 1

Ammeter Installation 12/86

Applicability: PA-28-150/160 with S/Nos. 28-3378 through 28-4377.

PA-28-180 with S/Nos. 28-3378 through 28-7505259 and 28-E13.

PA-28-181 with S/Nos. 28-7690001 through 28-8190279, 28-8290017, 28-8290018,

28-8290028, 28-8290033, 28-8290034 and 28-8290036.

PA-28-235 with S/Nos. 28-10720 through 28-7710089 and 28-E11. PA-28-236 with S/Nos. 28-7911001 through 28-8511020.

PA-28-201T with S/Nos. 28-7921001 through 28-7921091.

PA-28R-180 with S/Nos. 28R-30004 through 28R-30481, 28R-30483 through 28R- 7130013.

PA-28R-200 with S/Nos. 28R-30482, 28R-35001 through 28R-7635545 PA-28R-201 with S/Nos. 28R-7737001 through 28R-7837317.

PA-28R-201T with S/Nos. 28R-7703001 through 28R-7803373. PA-28RT-201 with S/Nos. 28R-7918001 through 28R-8218026. PA-28RT-201T with S/Nos. 28R-7931001 through 28R-8631006.

Except those aircraft fitted with ninety (90) ampere alternators.

Requirement: Action in accordance with Piper Service Bulletin No. 811A. Ensure the shunt is positioned and adequately supported to prevent mechanical loads being applied to the 20 gauge wires connected to the ammeter.

Compliance: Within 100 hours time in service after 31 July 1986.

Background: Reports have been received of loose and/or shorting ammeter connections at the ammeter cluster gauge. If this condition is allowed to continue without rectification the possibility exists for electrical failure or a fire within the cockpit. Amendment 1 clarifies the protection requirements.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/PA-28/86 Amdt 1 - Ammeter Installation