Commonwealth legislation

AD/PA-24/44 Amdt 1 - Main Landing Gear Side Brace Stud

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Airworthiness Directive requires owners/operators of Piper PA-24, PA-24-250, PA-24-260 and PA-24-400 aeroplanes to remove both left and right main landing-gear side‑brace studs, inspect them for cracks using fluorescent penetrant or magnetic particle methods, and replace any cracked stud with an approved part following the maintenance manual. Compliance is within 100 hours time-in-service after 4 January 1996 and thereafter every 1,000 hours; operators bear the inspection and replacement costs and must follow the maintenance manual instructions.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/PA-24/44 Amdt 1 - Main Landing Gear Side Brace Stud.

AD/PA-24/44 Amdt 1 - Main Landing Gear Side Brace Stud

View image in the official source

View image in the official source
AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/PA-24/44 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official source

Piper PA-24 (Comanche) Series Aeroplanes

AD/PA-24/44

Amdt 1

Main Landing Gear Side Brace Stud 9/2002

Applicability: Models PA24, PA24-250, PA-24-260, and PA24-400 aircraft.

Requirement: Remove both the left and right main gear side brace studs from the aircraft in accordance with the instructions contained in the Landing Gear section of the maintenance manual, and inspect each main gear side brace stud for cracks using fluorescent penetrant or magnetic particle inspection methods. Figure 1 of this Directive depicts the area where the sidebrace stud is to be inspected.

View image in the official source

Piper PA-24 (Comanche) Series Aeroplanes

AD/PA-24/44 Amdt 1 (continued)

This figure is provided to depict the area of the sidebrace stud to be inspected. This is not intended to represent the configuration of all models affected.

Note 1: All affected Models PA24 and PA24-250 aircraft were equipped at manufacture with part number 20829-00 main gear side brace studs. All affected Models PA24-260 and PA24-400 aircraft were equipped at manufacture with part number 22512-00 main gear side brace studs.

For any main gear side brace stud found cracked, replace the cracked stud with an approved serviceable part in accordance with the instructions contained in the Landing Gear section of the applicable maintenance manual.

Note 2: FAA AD 97-01-01 R1 Amdt 39-10864 refers.

Compliance: Within the next 100 hours time in service after 4 January 1996, and thereafter at intervals not to exceed 1,000 hours time in service.

The original compliance times of this Airworthiness Directive are unchanged by this amendme nt.

This amendment becomes effective on 5 September 2002.

Background: The FAA received reports of main gear side brace stud cracks, including seven incidents where the main landing gear collapsed. The actions specified by this Directive are intended to prevent a main gear collapse caused by main gear side brace stud cracks, which could result in loss of control of the aircraft during landing operations.

Amendment 1 updates the FAA AD reference.

The original issue of this Airworthiness Directive became effective on 4 January 1996.

View image in the official source

David Alan Villiers

Delegate of the Civil Aviation Safety Authority 23 July 2002

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 14 August 2002.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/PA-24/44 Amdt 1 - Main Landing Gear Side Brace Stud

AIRWORTHINESS DIRECTIVE

Piper PA-24 (Comanche) Series Aeroplanes

AD/PA-24/44

Amdt 1

Main Landing Gear Side Brace Stud 9/2002

Applicability: Models PA24, PA24-250, PA-24-260, and PA24-400 aircraft.

Piper PA-24 (Comanche) Series Aeroplanes

AD/PA-24/44 Amdt 1 (continued)

This figure is provided to depict the area of the sidebrace stud to be inspected. This is not intended to represent the configuration of all models affected.

Note 2: FAA AD 97-01-01 R1 Amdt 39-10864 refers.

Compliance: Within the next 100 hours time in service after 4 January 1996, and thereafter at intervals not to exceed 1,000 hours time in service.

The original compliance times of this Airworthiness Directive are unchanged by this amendme nt.

This amendment becomes effective on 5 September 2002.