CTHIn ForceLegislation
AD/PA-24/32 Amdt 2 - Stabilator Attachment Bolts - Inspection
Piper PA-24 (Comanche) Series AeroplanesPiper PA-24 (Comanche) Series Aeroplanes
Start here
Get a plain-English read of Piper PA-24 (Comanche) Series Aeroplanes
Turn the raw legal text into a practical explanation grounded in AD/PA-24/32 Amdt 2 - Stabilator Attachment Bolts - Inspection.
Piper PA-24 (Comanche) Series Aeroplanes
| AD/PA-24/32 Amdt 2 | Stabilator Attachment Bolts - Inspection | 11/2008 |
|---|
| Applicability: | All models Piper PA-24, PA-24-250 and PA-24-260 with serial numbers from 24-1 to 24-5047; and PA-24-400 with serial numbers from 26-2 to 26-148 if the four stabilator attachment bolts are not made of corrosion-resistant steel. |
|---|---|
| Requirement: | Remove the four stabilator attachment bolts and inspect for corrosion in accordance with Piper SL No. 667A.If corrosion is found, before further flight replace the bolt, nut and washer with unused parts of the same part numbers or equivalent. Alternatively, the bolts can be replaced by equivalent corrosion-resistant AN bolts.Note 1: Parts numbered 502329 and 502342 are corrosion-resistant bolts.Note 2: FAA AD 74-13-03 refers. |
| Compliance: | 1. If the four stabilator attachment bolts have not previously been inspected for corrosion in accordance with this AD, Piper SL No. 667A, or FAA AD 74-13-03, before further flight after 31 October 2008.Note 3: Piper PA-24-400 aircraft by serial number are included for the first time at Amendment 2. Stabilator attachment bolts in these aircraft might not be corrosion-resistant steel.2. If the four stabilator attachment bolts have previously been inspected in accordance with any of the instructions specified at 1. above, at intervals not exceeding three years or five hundred hours time in service, whichever occurs first. Alternatively, the bolts can be replaced by equivalent corrosion-resistant AN bolts.Note 4: Compliance with this AD at amendment 1 constitutes compliance with this amendment. |
| This Amendment becomes effective on 23 October 2008. |
| Background: | The original issue of this AD in January 1974 specified replacement of stabilator attachment bolts within 100 hours after 31 January 1974, based on Piper SL No. 667.Amendment 1 in March 1974 specified inspection at 3 monthly intervals as an alternative to replacement, due to difficulties with supply of suitable corrosion-resistant bolts. In March 1974 Piper issued SL No. 667A to authorise, as an alternative to corrosion-resistant bolts, new steel alloy bolts with repetitive inspections at intervals not to exceed 500 hours in service.In June 1974 the FAA issued AD 74-13-03 (amdt 39-1872) specifying inspection at intervals not to exceed 3 years or 500 hours, whichever occured first, as an alternative to replacement. AD 74-13-03 nominated Piper SL No. 667A.Amendment 2 is raised to add the applicable serial number range for Piper PA-24-400 aircraft; to align the inspection interval with FAA AD 74-13-03; to identify the FAA AD on which AD/PA-24/32 is now based; and to add Piper SL No. 667A as the instructions for inspecting steel alloy bolts. |
|---|