CTHIn ForceLegislation
AD/PA-23/92 - Stabilator Outboard Nose Rib - Installation
Piper PA-23 (Apache and Aztec) Series AePiper PA-23 (Apache and Aztec) Series Aeroplanes
Start here
Get a plain-English read of Piper PA-23 (Apache and Aztec) Series Ae
Turn the raw legal text into a practical explanation grounded in AD/PA-23/92 - Stabilator Outboard Nose Rib - Installation.
Piper PA-23 (Apache and Aztec) Series Aeroplanes
| AD/PA-23/92 | Stabilator Outboard Nose Rib - Installation | 2/2009 |
|---|
| Applicability: | All model PA-23-250 with serial numbers 27-7654001 to 27-7754041 equipped with stabilators Piper part number 15658-2, -3, -22, or -23. |
|---|---|
| Requirement: | 1. Reinforce the mounting of the stabilator tube and weight assemblies by installing additional nose ribs by means of Piper Kit 761 141 or equivalent kit in accordance with Piper SL No. 807A.Note 1: USA AD 78-02-03 (Amdt 39-3128) paragraph (d) refers. |
| 2. Balance the stabilator in accordance with paragraph 4-65 of the Piper PA-23-250 “Aztec” Service Manual when the above modification is incorporated.Note 2: USA AD 78-02-03 (Amdt 39-3128) paragraph (e) refers. | |
| Compliance: | Unless already accomplished, within 100 hours time in service following the date of effectivity of this Amendment. |
| This Airworthiness Directive becomes effective on 12 February 2009. | |
| Background: | USA AD 78-02-03 paragraphs (a) and (c) are mandated in Australia by AD/PA-23/70 and AD/PA-23/73 respectively. Paragraph (b) specifies once-only action and was previously mandated by AD/PA-23/70 Amendment 1. Paragraph (d) is mandated by this AD. |
Image unavailable in extracted text
David Punshon
Delegate of the Civil Aviation Safety Authority
24 December 2008