1AD/OXY/13 - Puritan Bennett Aero Systems Crewmember Protective Breathing Equipment

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

Image unavailable in extracted text
Oxygen Systems

AD/OXY/13 Puritan Bennett Aero Systems Crewmember

Protective Breathing Equipment

3/94

Applicability: Puritan Bennett Aero Systems Crewmember Protective Breathing Equipment (PBE), part numbers 119003 and 119003-01. These equipments are known to be installed on, but not limited to, the following aircraft series:

Aerospatiale ATR42 and ATR72 Airbus Industrie A300, A310 and A320

Boeing 727, 737, 747, 757 and 767

British Aerospace BAe 146 and BAe 31 Canadair RJ

de Havilland DHC-8

Fokker 100

Lockheed L1011

Mc Donnell Douglas DC8, DC9, DC10, MD11, MD80, MD81, MD82 & MD83 SAAB SF340

Shorts 360

Requirement: 1. Inspect the PBE units in accordance with the Accomplishment Instructions of Puritan Bennett Aero Systems Service Bulletin 119003-35-1 dated 15 February 1993 to confirm that a yellow label is attached to the red rip tag.

2. Remove from service units without the yellow label.

Note: FAA AD 93-24-16 Amdt 39-8765 refers.

Compliance: 1. Prior to 1 March 1996.

2. Immediately following the inspection.

Background: Some PBE units have been found to have deteriorated neck seals.

This condition could reduce the protection afforded the crewmember if the PBE unit was used while locating and/or extinguishing an inflight fire.

Compliance with this Directive provides a method of early detection of PBE units with deteriorated neck seals and decreases the likelihood of crewmembers being affected by smoke.

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES