CTHIn ForceLegislation
AD/OH-58/4 - Tail Rotor Blade Skin Surface
Bell OH-58A (206A-1) Series HelicoptersBell OH-58A (206A-1) Series Helicopters
Start here
Get a plain-English read of Bell OH-58A (206A-1) Series Helicopters
Turn the raw legal text into a practical explanation grounded in AD/OH-58/4 - Tail Rotor Blade Skin Surface.
Bell OH-58A (206A-1) Series Helicopters
| AD/OH-58/4 | Tail Rotor Blade Skin Surface | 9/2008 |
|---|
| Applicability: | Model OH-58A (Bell 206A-1) series helicopters, including all certificated versions; with tail rotor blades part number 206-010-750-005 and -007, installed. |
|---|---|
| Requirement: | 1. Perform a visual inspection for chordwise cracks in the tail rotor blade skin surfaces in the area between Blade Station 7.1 and 11.1, using a 3x or higher magnifying glass (Blade Station 0 is the centre of the tail rotor yoke).If cracking is detected during any inspection, before further flight, replace affected blade(s).2. Tail rotor blades with 450 hours or more total time in service must be removed from service.3. Tail rotor blades with less than 450 hours total time in service must be removed from service.Note: FAA AD 80-17-05 Amdt 39-3875 refers. |
| Compliance: | 1. Before the first flight of each day; until blade replacement per Requirement2 or 3.2. Within the next 50 hours time in service, unless already accomplished.3. Upon the accumulation of 500 hours total time in service. |
| This Airworthiness Directive becomes effective on 28 August 2008. | |
| Background: | The FAA requires certain actions to prevent failure of the tail rotor blades due to fatigue cracking. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
14 July 2008