Commonwealth legislation

AD/MSR/28 Amdt 1 - Horizontal Stabilizer Spar and Attachment Fittings

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

Mandates repetitive inspections of the horizontal stabilizer forward spar and attachment fittings on specified Aerospatiale Rallye aircraft, to be carried out in accordance with Rallye Service Bulletin No. 145/1 (Rev. 1). It applies to the listed models and requires inspection within 100 hours time-in-service after 30 April 1986 or at the next scheduled Maintenance Release inspection (whichever is later), and then at every subsequent scheduled Maintenance Release inspection. The manufacturer reported cracking; operators must perform recurring checks and bear inspection and repair costs to maintain airworthiness.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/MSR/28 Amdt 1 - Horizontal Stabilizer Spar and Attachment Fittings.

AD/MSR/28 Amdt 1 - Horizontal Stabilizer Spar and Attachment Fittings

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Aerospatiale Rallye Series Aeroplanes

AD/MSR/28

Amdt 1

Horizontal Stabilizer Spar and Attachment Fittings 5/87

Applicability: All models MS 880 B, MS 880 B-D, MS 885, MS 881, MS 883, 100 ST-D, 150 ST,

150 ST-D, 150 T, 150 T-D, 180 T, 180 TS, 180 T-D, 150 SV, 150 SVS, 110 ST, MS

890 A, MS 890 B, MS 892 A 150, MS 892 B 150, MS 892 E 150, MS 892 E-D 150,

MS 893 A, MS 893 B, MS 893 E, MS 893 E-D, MS 894 A, MS 894 C, MS 894 E,

Rallye 235 E, 235 E-D, 235 A, R 235 F, 235 C.

Requirement: Action in accordance with Rallye SB No. 145/1.

Compliance: Within 100 hours time in service after 30 April 1986 or at the next scheduled inspection for Maintenance Release issue after 30 April 1986 whichever is the later and thereafter at each scheduled inspection for Maintenance Release issue.

Background: The manufacturer reports cracking of the forward attachment fittings and spar.

This amendment references Revision 1 of Rallye SB 145 and introduces a repetitive inspection requirement.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/MSR/28 Amdt 1 - Horizontal Stabilizer Spar and Attachment Fittings