Commonwealth legislation

AD/LYC/100 - Piston Pin P/N LW-14077

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This directive orders removal of Lycoming piston pins P/N LW-14077 that are marked with code 17328. It applies to the Textron Lycoming engines listed in Service Bulletin 527B, any engines fitted with those pins since 15 Dec 1995, and to all cylinder kits; identified pins must be removed within 50 hours TIS after 2 Jan 1997 or before installation. The measure follows manufacturer advice that some pins released between 15 Dec 1995 and 17 Sep 1996 did not meet specification.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/LYC/100 - Piston Pin P/N LW-14077.

AD/LYC/100 - Piston Pin P/N LW-14077

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 106 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Lycoming Piston Engines

AD/LYC/100 Piston Pin P/N LW-14077 1/97

Applicability: 1. All Textron Lycoming piston engines as detailed by model and serial number in Textron Lycoming Service Bulletin (SB) Number 527B.

Note 1: Applicable engines were released by Textron Lycoming in the period 15 December 1995 to 17 September 1996.

2. All Textron Lycoming piston engines in service which have had piston pins part number (P/N) LW-14077 installed since 15 December 1995.

3. All cylinder kits applicable to Textron Lycoming piston engines, regardless of the cylinder manufacturer.

4. Textron Lycoming piston pins P/N LW-14077 released by Textron Lycoming in the period 15 December 1995 to 17 September 1996.

Requirement: Remove from service all piston pins P/N LW-14077 which are marked with the code 17328.

Note 2: Lycoming SB No. 527B details procedures in which the piston pin may be identified without removing the cylinder.

Compliance: Applicability 1: Within 50 hours time in service after 2 January 1997.

Applicability 2: Within 50 hours time in service after 2 January 1997. Applicability 3: Prior to installation in an aircraft.

Applicability 4: Prior to installation in an aircraft.

Background: This directive has been issued to require certain piston pins to be removed from service. The requirement follows advice from the manufacturer that a quantity of piston pins released since 15 December 1995 do not meet the manufacturer’s specifications. The failure of a piston pin in service may result in engine failure.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/LYC/100 - Piston Pin P/N LW-14077