AD/LEARJET 35/8 - Refrigeration System Condenser Fan - Inspection and Replacement
1AD/LEARJET 35/8 - Refrigeration System Condenser Fan - Inspection and Replacement
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/LEARJET 35/8 - Refrigeration System Condenser Fan - Inspection and Replacement.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Gates Learjet 35 and 36 Series Aeroplanes
AD/LEARJET 35/8 Refrigeration System Condenser
Fan - Inspection and Replacement
9/78
Applicability: Model 35 with S/Nos. 35-001 to 35-194. Model 36 with S/Nos. 36-001 to 36-040. And any 35/36 Series Learjet which has had a Condenser Fan changed since 1 July 1977.
Requirement: 1. Inspect the P/No. rubber-stamped on a blade of the refrigeration condenser fan.
- If the fan bears the P/No. 6608059-3, attach a placard worded as follows to the instrument panel adjacent to the refrigeration system control switch:
WARNING
DO NOT OPERATE REFRIGERATION SYSTEM UNDER ANY CIRCUMSTANCES ON THE GROUND OR IN THE AIR UNTIL FAN HAS BEEN REPLACED.
Note: The correct fans have blades which taper in thickness towards the tip and bear the P/Nos. 6608059-2 or 6608059-4.
or Gates Learjet SB 35/36-21-3.
Compliance: Before further flight.