CTHIn ForceLegislation
AD/JETSTREAM/101 - Down Lock Assembly
British Aerospace BAe 3100 (Jetstream) SBritish Aerospace BAe 3100 (Jetstream) Series Aeroplanes
Start here
Get a plain-English read of British Aerospace BAe 3100 (Jetstream) S
Turn the raw legal text into a practical explanation grounded in AD/JETSTREAM/101 - Down Lock Assembly.
British Aerospace BAe 3100 (Jetstream) Series Aeroplanes
| AD/JETSTREAM/101 | Down Lock Assembly | 11/2005 |
|---|
| Applicability: | Model Jetstream HP137 Mark 1 and Jetstream Series 200, 3100 and 3200 aeroplanes. |
|---|---|
| Requirement: | 1. Remove from service and replace with a new or serviceable part any incorrectly heat treated radius rod down lock piston listed in Paragraph 1A of BAE SYSTEMS Service Bulletin 32-JA040547 Original Issue or later EASA approved revision. Replace defective components in accordance with Paragraph 1 N of BAE SYSTEMS Service Bulletin 32-JA040547 Original Issue or later EASA revision.2. Do not install a radius rod assembly on an aircraft that contains a down lock piston identified in Paragraph 1A of BAE SYSTEMS Service Bulletin32-JA040547 Original Issue or later EASA approved revision.Note: UK CAA AD G-2005-0024, EASA reference No 2005-6188 dated 22 August 2005 refers. |
| Compliance: | 1. At the next main landing gear radius rod overhaul but no later than 31 August 2010.2. From the effective date of this Directive. |
| This Airworthiness Directive becomes effective on 27 October 2005. | |
| Background: | A batch of main landing gear (MLG) downlock pistons with incorrect heat treatment have been installed into MLG radius rods fitted to the above aircraft types during overhaul. The effect of the incorrect heat treatment is reduced strength and hardness, which can lead to failure of the piston and/or contamination of the hydraulic system. Failure of the downlock piston in combination with a loss of hydraulic pressure could result in the collapse of the affected MLG, which during the critical phases of take-off and landing will result in a loss of directional control. |
Image unavailable in extracted text
James Coyne
Delegate of the Civil Aviation Safety Authority
15 September 2005