CTHIn ForceLegislation
AD/JBK 117/36 - Pressure Altitude Limitation and Max N1 Check
Kawasaki BK 117 Series HelicoptersKawasaki BK 117 Series Helicopters
Start here
Get a plain-English read of Kawasaki BK 117 Series Helicopters
Turn the raw legal text into a practical explanation grounded in AD/JBK 117/36 - Pressure Altitude Limitation and Max N1 Check.
Kawasaki BK 117 Series Helicopters
| AD/JBK 117/36 | Pressure Altitude Limitationand Max N1 Check | 25/2010 |
|---|
| Applicability: | Kawasaki BK117C-1 and C-2 helicopters. |
|---|---|
| Requirement: | Fuel Control Units which have not been Modified in accordance with Turboméca Service Bulletin No.292 73 0358 (TU358) must not be installed in any helicopter.Note: JCAB AD TCD-7000-1-2008 refers. |
| Compliance: | After the effective date of this Directive. |
| This Airworthiness Directive becomes effective on 24 December 2010. | |
| Background: | During supplementary testing the “MAX N1 CHECK” at maximum certification altitude, a few helicopters could not reach the specified N1 power threshold value. The cause was identified as an engine acceleration limitation due to a delivered fuel flow lower than the engine fuel flow demand to achieve the OEI rating at high altitude. The fuel flow is limited by the FCU acceleration law in those cases. This limitation could potentially occur at altitudes exceeding 10,000 feet, depending on the engine and FCU characteristics.Turboméca has now developed a modification (TU358) that will, when accomplished on both engines installed on the helicopter, cancel the required checks and allow the removal of the placard and flight manual changes. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
9 December 2010