Commonwealth legislation

AD/HS 125/170 - Wing and Fuselage Attachment Bolts

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

5/10 complexity

This Airworthiness Directive requires inspections of wing-to-fuselage attachment bolts on specified Hawker 800 and 800XP aeroplanes, using procedures in named Raytheon service bulletins. It affects operators and maintenance organisations for the listed serial-numbered aircraft because it makes those inspections mandatory and ties compliance to particular service‑bulletin revisions.

Operators pay for inspections and any repairs; the AD permits certain earlier inspections to satisfy the requirement only for locations listed in the original service bulletin, while later revisions add inspection locations.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/HS 125/170 - Wing and Fuselage Attachment Bolts.

AIRWORTHINESS DIRECTIVE

View image in the official source

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official source

British Aerospace BAe 125 Series Aeroplanes

AD/HS 125/170 Wing and Fuselage Attachme

AD/HS 125/170 Wing and Fuselage Attachment Bolts 7/2003

Applicability: Model Hawker 800XP and 800 aircraft, with serial numbers 258287 through 258390; excluding serial numbers 258289, 258291, 258292, 258293, 258294, 258295,

258301, 258303, 258310, 258312, 258313, 258315, 258321, 258336, and 258343.

Requirement: 1. For Model Hawker 800XP aircraft identified in effectivity of Raytheon Service Bulletin SB 51-3408, dated October 2000, excluding Service Bulletin/Kit Drawing Report Fax: Inspect in accordance with above referenced service bulletin.

2. For Model Hawker 800XP aircraft identified in effectivity of Raytheon Service Bulletin SB 51-3426, Revision 1, dated November 2001, excluding Service Bulletin/Kit Drawing Report Fax: Inspect in accordance with above referenced service bulletin. Inspection before the effective date of this Directive in accordance with the original issue of above referenced service bulletin, is acceptable for compliance with the inspection requirements only for those locations identified in the original service bulletin; Revision 1 requires inspections at additional locations.

3. For Model Hawker 800 aircraft identified as Group A aircraft in Raytheon Service Bulletin SB 51-3421, Revision 1, dated November 2001, including Appendix 1, dated December 2000, excluding Service Bulletin/K it Drawing Report Fax: Inspect in accordance with above referenced service bulletin. Inspection before the effective date of this Directive in accordance with the original issue of above referenced service bulletin, including Appendix 1, is acceptable for compliance with this inspection requirement for Group A aircraft.
4. For Model Hawker 800 aircraft identified as Group B aircraft in Raytheon Service Bulletin SB 51-3421, Revision 1, dated November 2001, including Appendix 1, dated December 2000, excluding Service Bulletin/Kit Drawing Report Fax: Inspect in accordance with above referenced service bulletin. Inspection before the effective date of this Directive in accordance with the original issue of above referenced service bulletin, including Appendix 1, is acceptable for compliance with the inspection requirement only for those locations identified in the original service bulletin; Revision 1 requires inspections at additional locations.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

AIRWORTHINESS DIRECTIVE AIRWORTHINESS DIRECTIVE

AIRWORTHINESS DIRECTIVE

British Aerospace BAe 125 Series Aeroplanes

AD/HS 125/170 Wing and Fuselage Attachme AD/HS 125/170 Wing and Fuselage Attachment Bolts 7/2003

AD/HS 125/170 Wing and Fuselage Attachment Bolts 7/2003

Applicability: Model Hawker 800XP and 800 aircraft, with serial numbers 258287 through 258390; excluding serial numbers 258289, 258291, 258292, 258293, 258294, 258295,

258301, 258303, 258310, 258312, 258313, 258315, 258321, 258336, and 258343.

2. For Model Hawker 800XP aircraft identified in effectivity of Raytheon Service Bulletin SB 51-3426, Revision 1, dated November 2001, excluding Service Bulletin/Kit Drawing Report Fax: Inspect in accordance with above referenced service bulletin. Inspection before the effective date of this Directive in accordance with the original issue of above referenced service bulletin, is acceptable for compliance with the inspection requirements only for those locations identified in the original service bulletin; Revision 1 requires inspections at additional locations.

3. For Model Hawker 800 aircraft identified as Group A aircraft in Raytheon Service Bulletin SB 51-3421, Revision 1, dated November 2001, including Appendix 1, dated December 2000, excluding Service Bulletin/K it Drawing Report Fax: Inspect in accordance with above referenced service bulletin. Inspection before the effective date of this Directive in accordance with the original issue of above referenced service bulletin, including Appendix 1, is acceptable for compliance with this inspection requirement for Group A aircraft.
4. For Model Hawker 800 aircraft identified as Group B aircraft in Raytheon Service Bulletin SB 51-3421, Revision 1, dated November 2001, including Appendix 1, dated December 2000, excluding Service Bulletin/Kit Drawing Report Fax: Inspect in accordance with above referenced service bulletin. Inspection before the effective date of this Directive in accordance with the original issue of above referenced service bulletin, including Appendix 1, is acceptable for compliance with the inspection requirement only for those locations identified in the original service bulletin; Revision 1 requires inspections at additional locations.