Commonwealth legislation

AD/HS 125/167 - Turbine Air Discharge and Water Separator Ducts

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Airworthiness Directive requires owners/operators of specific BAe 125 / Hawker 800 and 1000 series aeroplanes (limited by model and serial number) to replace or modify turbine air discharge and water-separator duct clamps, bedding strips and sleeves following Raytheon service bulletins. CASA issued the directive to prevent duct disconnection that could cause loss of cabin pressure. Operators pay for parts and labour and must complete the work within 100 flight hours or two months, and record compliance per the service instructions.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/HS 125/167 - Turbine Air Discharge and Water Separator Ducts.

AD/HS 125/167 - Turbine Air Discharge and Water Separator Ducts

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
View image in the official source
British Aerospace BAe 125 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

View image in the official source

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

View image in the official sourceAD/HS 125/167 Turbine Air Discharge and Water Separator Ducts

5/2002

Applicability: Model BAe 125 800A, 1000A, and 1000B series aeroplanes, and Hawker 800 aeroplanes, up to and including serial number 258406; and Hawker 800XP series aeroplanes, up to and including serial number 258483, and 1000 series aeroplanes.

Requirement: 1. For Model BAe.125 series 800A series aeroplanes; Hawker 800 aeroplanes up to and including serial number 258406; and Hawker 800XP series aeroplanes up to and including serial number 258459:

Unless accomplished previously, remove the clamps, bedding tapes, and rubber connecting sleeves at the ends of the air turbine discharge duct and the water separator, and replace the clamps and rubber connecting sleeves with new, improved components, in accordance with the Accomplishment Instructions of Raytheon Service Bulletin SB 21-3377, Revision 1, dated July 2000.

For Model Hawker 800XP series aeroplanes having serial numbers 258460 to 258483; Model BAe.125 series 1000A/1000B aeroplanes; and Hawker 1000 series aeroplanes:

Unless accomplished previously, remove the aluminium bedding strips from the air conditioning duct sleeves attached to both ends of the turbine air discharge duct and at the outlet end of the water separator, in accordance with the Accomplishment Instructions of Raytheon Service Bulletin SB 21-3414, Revision 1, dated July 2000.

Previous action and Terminating action:

For certain aeroplanes, actions described in the original issue of Raytheon Service Bulletin SB 21-3377 may have been accomplished prior to the effective date of this Airworthiness Directive and are not required to be repeated. However, any action described in Raytheon Service Bulletin SB 21-3377, Revision 1, dated July 2000; or Raytheon Service Bulletin SB 21-3414, Revision 1, dated July 2000, that has not been accomplished on those aeroplanes must be accomplished in accordance with this Airworthiness Directive. Accomplishment of the actions specified in both Raytheon Service Bulletin SB 21-3377, Revision 1, dated July 2000; and Raytheon Service Bulletin SB 21-3414, Revision 1, dated July 2000, is terminating action for the requirements of this Airworthiness Directive.

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official sourceNote: FAA AD 2001-13-05 refers.

Compliance: For Requirement 1 and 2: Within 100 hours time-in-service or, two months after the effective date of this Airworthiness Directive, whichever occurs first.

This Airworthiness Directive becomes effective on 10 April 2002.

Background: The manufacturer reported that air conditioning clamps and connecting sleeves that connect the water separator and turbine discharge duct have come loose. Should either of these ducts become disconnected, it will result in loss of air supply to maintain adequate cabin pressure. Loss of adequate cabin pressure at high altitude would require emergency procedures to be used, such as use of oxygen, auxiliary pressurisation, or emergency descent. This Airworthiness Directive therefore requires the replacement of existing clamps, bedding tapes and sleeves with new improved components that will prevent clamp slippage and subsequent duct disconnection.

View image in the official source

Eugene Paul Holzapfel

Delegate of the Civil Aviation Safety Authority 28 March 2002

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 10 April 2002.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/HS 125/167 - Turbine Air Discharge and Water Separator Ducts

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

British Aerospace BAe 125 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

AD/HS 125/167 Turbine Air Discharge and Water Separator Ducts

5/2002

For Model Hawker 800XP series aeroplanes having serial numbers 258460 to 258483; Model BAe.125 series 1000A/1000B aeroplanes; and Hawker 1000 series aeroplanes:

Previous action and Terminating action: