Commonwealth legislation

AD/HOSE/7 - Titeflex Hose Assemblies - Inspection

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

This Airworthiness Directive requires operators to inspect and, if necessary, replace specified Titeflex hose assemblies identified by part number in Titeflex Service Bulletin 73‑2 and by FAA AD 2002‑22‑12 (Applicability; Requirement). It applies where those hoses are fitted to the listed aircraft and engines.

Operators pay for inspections and replacements and must complete the work by 13 December 2006 (Compliance). CASA issued the directive because the hoses failed a laboratory fire test (Background).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/HOSE/7 - Titeflex Hose Assemblies - Inspection.

AIRWORTHINESS DIRECTIVE

View image in the official source

View image in the official source
For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Hose Assemblies

AD/HOSE/7 Titeflex Hose Assemblies - Ins

AD/HOSE/7 Titeflex Hose Assemblies - Inspection 3/2003

Applicability: Hose assemblies manufactured by Titeflex Corporation as identified by part number in Titeflex Corporation Service Bulletin 73-2 dated 27 November 2000. The applicable hoses may be fitted to, but not limited to;

Aeroplane models: Airbus A300, A310, A340; Boeing 707, 727, 737-200, 737- 200C, 747, 757, 767; Bombardier CL-600 1A11; BAe146; McDonnell Douglas DC8 series; Cessna 650; and
Engines: General Electric CF6-80C; CFM International CFM56-5C; Honeywell ALF502, LF507 series.

Requirement: Action per the requirements of FAA AD 2002-22-12 Amdt 39-12938.

Note 1: FAA AD 2002-22-12 Amdt 39-12938, Netherlands AD 2002-152, and Italian

AD 2002-588 refers.

Note 2: Titeflex Corporation SB 73-2 may be obtained from www.titeflex.com.

Compliance: No later than 13 December 2006.

This Airworthiness Directive becomes effective on 20 March 2003.

Background: The hoses specified in this Directive have failed the fire test under laboratory conditions and are replaced to minimise potential fire hazard.

View image in the official source

James Coyne

Delegate of the Civil Aviation Safety Authority 28 January 2003

View image in the official source

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

AIRWORTHINESS DIRECTIVE AIRWORTHINESS DIRECTIVE

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

Hose Assemblies

AD/HOSE/7 Titeflex Hose Assemblies - Ins AD/HOSE/7 Titeflex Hose Assemblies - Inspection 3/2003

AD/HOSE/7 Titeflex Hose Assemblies - Inspection 3/2003

Aeroplane models: Airbus A300, A310, A340; Boeing 707, 727, 737-200, 737- 200C, 747, 757, 767; Bombardier CL-600 1A11; BAe146; McDonnell Douglas DC8 series; Cessna 650; and
Engines: General Electric CF6-80C; CFM International CFM56-5C; Honeywell ALF502, LF507 series.

Requirement: Action per the requirements of FAA AD 2002-22-12 Amdt 39-12938.

Note 1: FAA AD 2002-22-12 Amdt 39-12938, Netherlands AD 2002-152, and Italian

AD 2002-588 refers.

Note 2: Titeflex Corporation SB 73-2 may be obtained from www.titeflex.com.

Compliance: No later than 13 December 2006.

This Airworthiness Directive becomes effective on 20 March 2003.

Background: The hoses specified in this Directive have failed the fire test under laboratory conditions and are replaced to minimise potential fire hazard.

James Coyne

Delegate of the Civil Aviation Safety Authority 28 January 2003