AD/GENERAL/45 Amdt 2 - Mitchell Automatic Pilot Servo Bridle Cable Clamp - Replacement
1AD/GENERAL/45 Amdt 2 - Mitchell Automatic Pilot Servo Bridle Cable Clamp - Replacement
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/GENERAL/45 Amdt 2 - Mitchell Automatic Pilot Servo Bridle Cable Clamp - Replacement.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Aircraft - General
AD/GENERAL/45
Amdt 2
Mitchell Automatic Pilot Servo Bridle Cable Clamp - Replacement
8/80
Applicability: All aircraft fitted with automatic pilot servo bridle clamps Mitchell Part No. 42A173 or 42A184 except aircraft fitted with Piper III Series automated Flight Control System bridle clamps incorporating a safety sleeve.
Document: 1. Edo-Aire Mitchell Service Bulletin MBI dated 1 June 1970; or 2. FAA AD 70-15-18.
Compliance: Within 300 hours time in service after 30 September 1970 for aircraft specified in FAA AD 70-15-18. Other aircraft within 300 hours time in service after 31 January 1974.
Background: The applicability has been revised to exempt bridle clamps installed by Piper which have a safety sleeve fitted. (Refer to Piper Service Manual instructions for Autocontrol III and Altimatic III for details of safety sleeves).