CTHIn ForceLegislation
AD/GBK 117/10 - Introduction of a Life Limit on Tail Rotor Drive Bevel Gear
//
© 2026 Zoe. All rights reserved.
Zoe is a legal information platform. Always consult the Federal Register of Legislation for authoritative text.
AD/GBK 117/10 - Introduction of a Life Limit on Tail Rotor Drive Bevel Gear
Start here
Turn the raw legal text into a practical explanation grounded in AD/GBK 117/10 - Introduction of a Life Limit on Tail Rotor Drive Bevel Gear.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Eurocopter BK 117 Series Helicopters
AD/GBK 117/10 Introduction of a Life Limit on Tail Rotor Drive Bevel Gear
3/98
Applicability: Eurocopter MBB-BK 117 helicopters Serial Number (S/N) 7001 - 7250 (incl) and 7500 - 7509 (incl).
Requirement: Enter a life limitation of 18,500 hours against Bevel Gear 117-12215-01(tail rotor (output) drive unit of the main transmission) in the Accessory Replacement Record and Historical Record “Main Transmission”. To calculate the replacement time for the installed bevel gear, the total operating time for the component needs to be known. If this is not known, the total operating time for the component shall be considered to be the operating time of the main transmission.
Note: LBA AD 97-350 dated 18 December 1997 refers.
Compliance: Action must be performed by 31 March 1998.
This airworthiness directive becomes effective on 26 February 1998.
Background: The working life of the tail rotor (output) drive unit of the main transmission has been recalculated by the manufacturer. This has resulted in the introduction of a life limit on bevel gear part number 117-12215-01 of 18,500 hours.