Commonwealth legislation

AD/GAF-N22/65 Amdt 3 - Rear Fuselage Frame

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Airworthiness Directive requires owners/operators of GAF N22 and N24 aeroplanes (that have not had ASTA Modification N806) to inspect the rear fuselage frame for cracks and to install ASTA Modification N806 following the manufacturer’s Nomad Alert Service Bulletin ANMD‑53‑15 Rev 3. The CASA delegate sets the compliance deadlines and the installation is the terminating action for the inspections (Requirement; Compliance).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/GAF-N22/65 Amdt 3 - Rear Fuselage Frame.

AD/GAF-N22/65 Amdt 3 - Rear Fuselage Frame

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
View image in the official source
GAF N22 and N24 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

View image in the official source

View image in the official source
For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/GAF-N22/65 Amdt 2 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/GAF-N22/65

Amdt 3

Rear Fuselage Frame 6/2000

Applicability: All model N22 and N24 aircraft which have NOT been modified in accordance with ASTA Modification N806.

Requirement: 1. Inspect the forward face of the rear fuselage frame for cracks in accordance with ASTA Nomad Alert Service Bulletin ANMD-53-15 Revision 3, Section 2.A, (Part 1 - Inspection).

Modify the aircraft by installing ASTA Modification N806 in accordance with ASTA Nomad Alert Service Bulletin ANMD-53-15 Revision 3, Section 2.C, (Part 3 - Mod N806 Incorporation).

Note: ANMD-53-15 Revision 3 describes the same inspection as that required by previous amendments to this AD.

Compliance: For Requirement Para 1: As detailed in the Requirement Document Para 1.D.(2).

For Requirement Para 2: As detailed in the Requirement Document Para 1.D.(4). Aircraft which have already exceeded the applicable compliance time must be modified within 12 months time in service after 15 June 2000.

This Amendment becomes effective on 15 June 2000.

Background: The initial issue of this directive was issued following receipt of a number of reports of aircraft with cracks around the rivet heads on the rear bulkhead frame. Frame failure may lead to loss of structural integrity and possible subsequent loss of aircraft control. This amendment adopts the inspection procedures and compliance times specified by the manufacturer, and requires installation of the preventive modification which is terminating action for the inspections.

Amendment 2 of this Airworthiness Directive became effective on 30 September 1993.

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Amendment 1 of this Airworthiness Directive became effective on 25 May 1993. The original issue of this Airworthiness Directive became effective on 25 May 1993.

Bernard Malcolm Hole

Delegate of the Civil Aviation Safety Authority 5 May 2000

View image in the official source

The above AD is notified in the Commonwealth of Australia Gazette on 17 May 2000.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/GAF-N22/65 Amdt 3 - Rear Fuselage Frame

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

GAF N22 and N24 Series Aeroplanes

AIRWORTHINESS DIRECTIVE

For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/GAF-N22/65 Amdt 2 and issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.

AD/GAF-N22/65

Amdt 3

Rear Fuselage Frame 6/2000

Applicability: All model N22 and N24 aircraft which have NOT been modified in accordance with ASTA Modification N806.

Requirement: 1. Inspect the forward face of the rear fuselage frame for cracks in accordance with ASTA Nomad Alert Service Bulletin ANMD-53-15 Revision 3, Section 2.A, (Part 1 - Inspection).

Modify the aircraft by installing ASTA Modification N806 in accordance with ASTA Nomad Alert Service Bulletin ANMD-53-15 Revision 3, Section 2.C, (Part 3 - Mod N806 Incorporation).

Note: ANMD-53-15 Revision 3 describes the same inspection as that required by previous amendments to this AD.

Compliance: For Requirement Para 1: As detailed in the Requirement Document Para 1.D.(2).

This Amendment becomes effective on 15 June 2000.