Commonwealth legislation

AD/G159/32 Amdt 1 - Jumpseat Placard - Installation

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This airworthiness directive requires operators of Gulfstream (Grumman) G.159 series aeroplanes to either fit a warning placard near any jumpseat between fuselage stations 119 and 169 or carry out a specified structural modification. The placard must use at least 5 mm high lettering and says "JUMPSEAT OCCUPANCY DURING TAXI, TAKEOFF OR LANDING PROHIBITED"; placards may be removed if the modification is installed. The Secretary approves equivalent placard locations; compliance is required within 10 hours time in service after 15 May 1978.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/G159/32 Amdt 1 - Jumpseat Placard - Installation.

AD/G159/32 Amdt 1 - Jumpseat Placard - Installation

COMMONWEALTH OF AUSTRALIA CIVIL AVIATION ORDERS CIVIL AVIATION SAFETY AUTHORITY PART 105 SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
GULFSTREAM (GRUMMAN) G.159 SERIES AEROPLANES

AD/G159/32 Amdt 1 Jumpseat Placard - Installation 6/78

Applicability: All models.

Requirement: To prevent injury to an occupant of any jumpseat located between fuselage stations 119 and 169, accomplish one of the following :-

Install a placard either on the bulkhead adjacent to the jumpseat or any equivalent location approved by the Secretary utilising a minimum of 3/16 inch (5mm) high lettering with the wording “JUMPSEAT OCCUPANCY DURING TAXI, TAKEOFF OR LANDING PROHIBITED”.

2. Modify in the following manner:

Install the nose landing gear drag strut (fused) or bulkhead modification in accordance with GAAC Service Change No. 226, Part 1 or Part 11 as applicable.

The placard described in sub-para. 1 may be removed on the incorporation of either modification detailed in sub-para. 2 or for the period of extension of compliance granted by concession.

Compliance: Within 10 hours time in service after 15 May 1978, unless already accomplished.

Note 1: No concession extending this compliance after 8 November 1979 shall be granted.

Note 2: No concession extending this compliance to a date prior to 8 November 1979 shall be granted unless evidence of a firm commit ment by GAAC on the available date for the modification kit for that S/No. aircraft is supplied to the Secretary by

21 July 1978.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/G159/32 Amdt 1 - Jumpseat Placard - Installation