Commonwealth legislation

AD/FA-200/7 - Rudder Cables - Inspection and Modification

RepealedCTH

This Act has been repealed and is no longer in force. It is retained for historical reference.

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

1/10 complexity

This directive affects owners/operators of early Fuji FA-200 aeroplanes (serials 1–11), requiring safety work on the rudder control cables. You must inspect the cables soon and periodically, then replace the original thin 1/8" cables with stronger 5/32" cables before 1,000 total flight hours. It prevents cable failure that could cause loss of directional control.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/FA-200/7 - Rudder Cables - Inspection and Modification.

AD/FA-200/7 - Rudder Cables - Inspection and Modification

meta-content-style-type: text/css meta-content-type: application/xhtml+xml; charset=utf-8 meta-generator: Aspose.Words for .NET 22.10.0

?xml version="1.0" encoding="utf-8" standalone="no"?>

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source Fuji FA-200 Series Aeroplanes

AD/FA-200/7 Rudder Cables - Inspection and Modification 6/70

Applicability: All models with S/Nos. 1 to 11. Document: Fuji SB FAS-021.

Compliance: Inspect within 50 hours time in service after 5 June 1970 and thereafter at intervals not exceeding 100 hours time in service until replaced by the heavier cables.

Replace 1/8" cable with 5/32" cable before 1000 hours total time in service, after 1 September 1971.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.