CTHIn ForceLegislation
AD/F2000/24 - Software Integrity Check and Enhanced Avionics System Upgrade
Dassault Aviation Falcon 2000 Series AerDassault Aviation Falcon 2000 Series Aeroplanes
Start here
Get a plain-English read of Dassault Aviation Falcon 2000 Series Aer
Turn the raw legal text into a practical explanation grounded in AD/F2000/24 - Software Integrity Check and Enhanced Avionics System Upgrade.
Dassault Aviation Falcon 2000 Series Aeroplanes
| AD/F2000/24 | Software Integrity Check and Enhanced Avionics System Upgrade | 4/2007 DM |
|---|
| Applicability: | Falcon 2000EX aeroplanes, serial numbers 06, 28 to 86 inclusive, and 88; without Dassault Aviation Falcon Service Bulletin (SB) F2000EX-100 dated 30 August 2006 or later Revision approved by the European Aviation Safety Agency (EASA) implemented (ie still in EASy Step 2 configuration). |
|---|---|
| Requirement: | 1. Perform a software check using a dedicated software tool named “Flash Integrity Check” (FLICK) in accordance with the accomplishment instructions of Dassault Aviation Falcon SB F2000EX-120 dated 7 September 2006 or later Revision approved by the EASA. |
| 2. Make a temporary amendment to Chapter 5-40 of the Aircraft Maintenance Manual (AMM) to indicate that the MP 45-403 "Software modules integrity check" is to be accomplished at 40 day intervals. | |
| Note 1: To record the temporary inspection schedule, a copy of this Directive may be included in of the AMM as a temporary change. | |
| 3. Modify the aircraft in accordance with the accomplishment instructions of SB F2000EX-100 (modification M2656) or later Revision approved by the EASA. | |
| This is considered to be a terminating action for the temporary repetitive inspection requirements introduced by the Requirement 2 AMM amendment and the temporary amendment to the AMM may be removed. | |
| 4. For aircraft with advanced graphics module (AGM) and enhanced ground proximity warning module (EGPWM) modules with a part number (P/N) prior to 7026545-1904 (AGM) and 7028419-1904 (EGPWM), perform a check with the FLICK tool in accordance with the AMM MP 45-401. | |
| Note 2: EASA AD 2007-0032 refers. | |
| Compliance: | For Requirement 1and 2 - No later than 40 days after the effective date of this Directive. |
| For Requirement 3- Within 12 months after the effective date of this Directive. | |
| For Requirement 4 - After each operational software loading. |