CTHIn ForceLegislation
AD/ERJ-170/12 - Inertial Reference Unit Improvement
Embraer ERJ-170 Series AeroplanesEmbraer ERJ-170 Series Aeroplanes
Start here
Get a plain-English read of Embraer ERJ-170 Series Aeroplanes
Turn the raw legal text into a practical explanation grounded in AD/ERJ-170/12 - Inertial Reference Unit Improvement.
Embraer ERJ-170 Series Aeroplanes
| AD/ERJ-170/12 | Inertial Reference Unit Improvement | 11/2007 |
|---|
| Applicability: | All ERJ-170( ) aircraft models. |
|---|---|
| Requirement: | If not previously accomplished, remove the wiring connections from pins 51 and 52 in the electrical connectors of both Inertial Reference Units (IRU) in accordance with the procedures in Embraer Service Bulletin 170-34-0019 original issue dated 26 February 2007, or later revision approved by the Brazilian Agência Nacional de Aviação Civil (ANAC). |
| Note: ANAC AD 2007-08-03 refers. | |
| Compliance: | Within the next 18 months after the effective date of this Directive. |
| This Airworthiness Directive becomes effective on 25 October 2007. | |
| Background: | The ANAC has advised of reports of IRU failures which lead to an erroneous flight path angle (FPA) indication on both primary flight displays, with no alert to this condition to the crew. On ERJ-170 aircraft, FPA is considered as important as pitch and bank angle for piloting purposes. |
| Since this condition affects flight safety, this Directive requires wiring changes which will improve IRU functionality. |
Image unavailable in extracted text
Charles Lenarcic
Delegate of the Civil Aviation Safety Authority
7 September 2007