CTHIn ForceLegislation
AD/EMB-120/38 - Electrical Wiring
Embraer EMB-120 (Brasilia) Series AeroplEmbraer EMB-120 (Brasilia) Series Aeroplanes
Start here
Get a plain-English read of Embraer EMB-120 (Brasilia) Series Aeropl
Turn the raw legal text into a practical explanation grounded in AD/EMB-120/38 - Electrical Wiring.
Embraer EMB-120 (Brasilia) Series Aeroplanes
| AD/EMB-120/38 | Electrical Wiring | 9/2005 |
|---|
| Applicability: | All EMB-120( ) aeroplanes. |
|---|---|
| Requirement: | Modify the fastening of the electrical wiring harnesses installed at the wing root (both LH and RH sides), alter the routing of the right outboard flap actuator harness and install anti-chaffing protection on those harnesses in accordance with the detailed instructions and procedures described in the Embraer Service Bulletin 120-24-0059, original issue, dated 6 April 2004, or later revisions approved by the Brazilian Centro Técnico Aeroespacial (CTA). |
| Note: DAC Brazil AD 2005-06-01 refers. | |
| Compliance: | Within the next 5000 hours time in service after the effective date of this Directive. |
| This Airworthiness Directive becomes effective on 1 September 2005. | |
| Background: | The actions required by his Directive are necessary to reduce the potential of ignition sources in the vicinity of the fuel tanks, which, in combination with flammable fuel vapours, could result in fuel tank explosions and consequent loss of the aeroplane. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
21 July 2005